User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 64 © June 2017 CommScope, Inc.
Installing UAPs
Unpack and Inspect the Wall Mounting Kit
1 Inspecttheexterioroftheshippingcontainer(s)forevidenceofroughhandlingthatmayhavedamaged
thecomponentsinthecontainer.
2 Unpackeachcontainerwhilecarefullycheckingthecontentsfordamageandverifywiththepackingslip.
3 Ifdamageisfoundorpartsaremissing,fileaclaimwiththecommercialcarrierandnotifyCommScope
TechnicalSupport(see
"ContactingDCCSGlobalTechnicalSupport”onpage126).Savethedamaged
cartonsforinspectionbythecarrier.
4 Saveallshippingcontainersforuseiftheequipmentrequiresshipmentatafuturedate.
Mount the UAP to a Wall
1 SelectthelocationtomounttheUAP.
2 MounttheWallBrackettoawallusingappropriatefasteners.[PN for the Wall Bracket?]
3 ThebracketMUSTbemountedinthecorrectorientationwiththetopofthebracketfacingupward(not
onitssideorupsidedown),asshownbelow.
Table 6-4. Components of the UAP Wall Mounting Kit (PN ??)
Quantity Component Description
1
Wall Bracket
The Wall Bracket must be securely mounted to a wall capable of supporting the weight of the UAP (3.2 Kg).
The UAP must
be mounted
with this end up.
Top
(square edges)
Boom
(angeld edges)
Wall Bracket