ASSEMBLY INSTRUCTIONS SPACE SAVER ITEM #: WHITE ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of the small parts. Care should be taken in unpacking and assembling this item to keep the small parts away from children. WARNING Young children can be seriously injured or killed, if furniture tips over. Don’t use this item for a TV stand. Use angle-braces or anchors to secure furniture to the wall.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. IF LOADED WITH MORE THAN 25 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST
TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILIPS SCREWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED.
STEP 1 STEP 1 1.Attach 1 magnet plate (F) to left door (1) by inserting 1 wood screw (D) through hole on magnet plate(F) then tighten to left door (1) by using a Philips screwdriver. 2.Attach 1 Handle (K) to left door (1) by inserting 2 Machine screw (J) through the holes on left door (1) then tighten to Handle (K) by using a Philips screwdriver. 3.Repeat the above steps to assemble another Magnet plate (F) & Handle (K) to right door (2). STEP 2 STEP 2 1.
STEP 3 STEP 3 1.Attach right support board (13) to upper right side panel (3) by inserting 2 wood dowels (A) into dowel holes and inserting 3 cam bolts (B) into cam lock holes in the upper right side panel (3). 2. Insert 3 cam locks (C) into the cam lock holes on the upper right side panel (3) then rotate clockwise to secure cam bolts (B) in place by using a Philips screwdriver. 3. Repeat the above step to assemble upper left side panel (4) and right support board (14). STEP 4 STEP 4 1.
STEP 5 STEP 5 1. Attach the Magnet (H) to the bottom of top board (7) by inserting 2pc wood screw through the holes on the Magnet (H) and tighten to the top board (7). 2. Screw in 4pc cam bolt (B) into the pre-threaded holes on the top board (7). 3. Attached the top board (7) to the upper left side panel (4) and upper right side panel (3) by inserting the cam bolt (B) into the cam lock holes on the upper left side panel (4) and upper right side panel (3). 4.
STEP 7 STEP 7 1. Screw in 2pc cam bolt (B) into the pre-threaded holes on the middle connection board (8). 2. Insert 8pc wooden dowels (A) into the holes on the lower left side panel (18), lower right side panel (17) and lower section top cross bars (15). 3.
STEP 8 STEP 8 1. Screw in 4pc cam bolt (B) into the pre-threaded holes on the middle connection board (8). STEP 9 STEP 9 1. Attach the upper assembled section to lower assembled section by insert 4 cam bolt (B) into the cam lock holes on the upper left side panel (4) and upper right side panel (3). 2. Insert 4pc cam locks (C) into the cam lock holes on the upper left side panel (4) and upper right side panel (3), then rotate clockwise to secure the cam bolt (B) in place by using a Philips Screwdriver.
STEP 10 STEP 10 1.Attach upper back board (9) & middle back board (10) together sliding into plastic connection strip (N). 2.Attach upper back board (9) and middle back board (10) to the cabinet by inserting 8 wood screws (G) through holes on upper back board (9) then tighten into the cabinet, and inserting 4 wood screws (G) through holes on the middle back board (10) then tighten into the cabinet by using a Philips screwdriver. 3.
STEP 12 STEP 12 1. Place the drawing with hole position on the wall that you desire to fix the spacesaver, drill 2 holes on the wall. 2. Insert 2 plastic anchor (L) into the holes on the wall 3. Attach the pre-assembled Spacesaver in place w/holes, then insert 2 long wood screws (M) through holes on the upper section cross bar (5) and tighten into 2 plastic anchors (L) in the wall. STEP 13 STEP 13 1. Insert 4 shelf holders (I) into holes on upper left side panel (3) and upper right side panel (4). 2.
ENJOY YOUR NEW CABINET NOW ! Attention Adults: The cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct the hazard such as tightening of screws and taking any damaged parts away from the children. Thank you for purchasing.