Full Product Manual

ManualsBrandsAncona ManualsKitchenEliya Single-Handle Pull-Down Sprayer Kitchen Faucet with Deckplate in Brushed Nickel

Single Handle Pull-out Kitchen Faucet

STANDARDS

Tools:

PLUMBERS PUTTY FLASHLIGHT BASIN WRENCH

SAFETY GLASSES SCREWDRIVER

PLIERSCHANNELLOCKS ADJUSTABLE WRENCH

HEX-KEY TAPE

Attention:

Helpful Information

Important

Eliya

2020-07-02 MAAN4251-1

SEALED-TUBE

tools for future use!

1.8 gpm/6.8 L/min

Summary of content (4 pages)

PAGE 1
Helpful Information Tools: Eliya Single Handle Pull-out Kitchen Faucet STANDARDS © ® PLUMBERS PUTTY FLASHLIGHT SAFETY GLASSES CHANNELLOCKS BASINWRENCH SCREWDRIVER ADJUSTABLE WRENCH PLIERS 1.8 gpm/6.
PAGE 2
Installation size map Faucet Installation 2 11.5 in. (29.2 cm) Remove the rubber, metal washers and mounting nut from the base by hand twisting it off. 17.2 in. (43.7 cm) 9.2 in. (23.4 cm) 9 in. (23 cm) 4.9 in. (12.6 cm) 2.4 in. (6.2 cm) 7.2 in. (18.4 cm) 10.3 in. (26.4 cm) 3 For 1-hole installation, insert the faucet through the hole on the sink. Faucet Installation For 3-hole installation, insert the faucet to the base plate and then through the hole on the sink.
PAGE 3
4 6 Secure the faucet by firmly hand tightening the rubber washer, metal washer and mounting nut back on the faucet threads underneath the sink. Tighten the screws on the mounting nut with a Phillips screwdriver. The faucet should be flushed for possible debris prior to using. Remove the nozzle head by hand twisting it off. Turn the faucet handle all the way on, turn on the hot and cold water supply and flush water lines for one minute. Re-install the nozzle head by hand twisting back on.
PAGE 4
Test Faucet Installation A. B. Turn on water supplies. Check connections for leaks. C. Remove hand shower and let both hot and cold water run for one minute. This will help clean any debris that might otherwise clog the system. Replace hand shower. D. Operate handle up and down, in cold and hot positions, to flush water lines thoroughly.