Datasheet

Data Sheet AD8675
Rev. E | Page 5 of 12
ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter Rating
Supply Voltage ±18 V
Input Voltage
±V supply
Input Current ±5 mA
Differential Input Voltage ±0.7 V
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range
RM-8, R-8 Packages −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range
RM-8, R-8 Packages −65°C to +150°C
Lead Temperature Range (Soldering, 10 sec) 300°C
NULL Pins (Pin 1, Pin 8), Input Current Maximum <50 µA, V
S
< V+
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages and
measured using a standard 4-layer board, unless otherwise
specified.
Table 5. Thermal Resistance
Package Type θ
JA
θ
JC
Unit
8-Lead MSOP (RM-8)
142
45
°C/W
8-Lead SOIC_N (R-8) 120 45 °C/W
POWER SEQUENCING
Establish the op amp supplies simultaneously with, or before,
any input signals are applied. If this is not possible, the input
current must be limited to 10 mA.
ESD CAUTION