Datasheet

AD8505/AD8506/AD8508
Rev. E | Page 5 of 20
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter Rating
Supply Voltage 5.5 V
Input Voltage ±V
SY
± 0.1 V
Input Current
1
±10 mA
Differential Input Voltage
2
±V
SY
Output Short-Circuit Duration to GND Indefinite
Storage Temperature Range −65°C to +150°C
Operating Temperature Range −40°C to +125°C
Junction Temperature Range −65°C to +150°C
Lead Temperature (Soldering, 60 sec) 300°C
1
Input pins have clamp diodes to the supply pins. The input current should
be limited to 10 mA or less whenever the input signal exceeds the power
supply rail by 0.5 V.
2
The differential input voltage is limited to 5 V or the supply voltage, whichever
is less.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θ
JA
is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages with its
exposed paddle soldered to a pad, if applicable. Table 4 shows
simulated thermal values for a 4-layer (2S2P) JEDEC standard
thermal test board, unless otherwise specified.
Table 4.
Package Type θ
JA
θ
JC
Unit
5-Lead SOT-23 (RJ-5) 190 92 °C/W
6-Ball WLCSP (CB-6-7) 105 N/A °C/W
8-Lead MSOP (RM-8) 142 45 °C/W
8-Ball WLCSP (CB-8-2) 82 N/A °C/W
14-Lead TSSOP (RU-14) 112 35 °C/W
14-Ball WLCSP (CB-14-1) 64 N/A °C/W
ESD CAUTION