Instruction manual

Appendix A – Upgrading the Firmware
106
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Firmware Versions
The following table contains firmware version information for the DXLink units.
DXLink Firmware Versions
Applies to Version # Date Differences
HDMI RX 1.0.80
and earlier
10/19/2012 A/V SEND_COMMANDs respond with STRINGs
SEND_COMMANDs must be sent in uppercase
HDMI RX 1.0.80
or later
01/07/13 Supports PS-POE-AT-TC (FG423-84) and PDXL-2
(FG1090-170)
HDMI RX 1.3.X or
later
03/07/13 A/V SEND_COMMANDs respond with COMMANDs
SEND_COMMANDs are not case sensitive
Updated VIDOUT_ASPECT_RATIO and VIDOUT_TESTPAT
commands
HDMI TX 1.1.26
and earlier
9/24/2012 A/V SEND_COMMANDs respond with STRINGs
SEND_COMMANDs must be sent in uppercase
Multi-Format TX /
Multi-Format Wallplate TX
1.0.44 7/19/2012 A/V SEND_COMMANDs respond with COMMANDs
SEND_COMMANDs are not case sensitive
Multi-Format TX /
Multi-Format Wallplate TX
1.0.45 7/19/2012 Same as 1.0.44
Modified VGA EDID
Added: VIDIN_PREF_EDID command for VGA input
HDMI TX /
Multi-Format TX /
Multi-Format Wallplate TX
1.2.X 10/19/2012 A/V SEND_COMMANDs respond with COMMANDs
SEND_COMMANDs are not case sensitive
Added: VIDIN_HDCP command for HDMI input
HDMI TX* 1.2.X 10/19/2012 When loading any 1.2.X version to an HDMI TX, you must
send the FACTORYAV command to reset the AV registers
(see page 96)
All Transmitters 1.2.40 or
later
01/07/13 Supports PS-POE-AT-TC (FG423-84) and PDXL-2
(FG1090-170)
All Transmitters 1.4.7 06/12/13 Supports 3D, Deep Color, High Bit Rate Audio, and limited
Telnet support of SEND_COMMANDs (no queries)
Includes new VGA EDID AMX_0500_003
Supports custom VGA EDID using DGX Configuration
Software and Program port
Supports asynchronous notifications (NetLinx Studio and
Teln e t )
HDMI RX 1.5.8 06/12/13 Supports 3D, Deep Color, and limited Telnet support of
SEND_COMMANDs (no queries)
Includes v1.0.0.6 FPGA code
Adds “show vs100 stats” Telnet command
All Transmitters 1.6.7 8/16/13 Supports USB functionality
HDMI RX 1.9.10 8/16/13 Supports USB functionality