Specifications

12
wood, stained to match millwork in Conference Rooms. Mount equipment identified below into lectern.
K. Multi-Media Lectern Gooseneck Microphone - AKG GN50 20-inch gooseneck and AKG CK31
Cardioid capsule (quantity:8).
Provide 15-foot ProCo AmeriQuad quad standard microphone cable
(quantity:8). Provide new, and integrate into system as shown in drawings.
L. Multi-Media Lectern Control Touch Panel (CTLP-1) AMX NXD-CV7 color video touch control panel
uitive control of all video/RGBHV source and destination routing assignments, audiovisual system
power (including projector power), and VCR transport functions. Include screen design and menu
branching drawings in submittals. Provide new, and integrate into system as shown in drawings.
M. Multi-Media Lectern Video Switcher (VSW-4) 0Extron SW4AV (quantity: 4) four input composite video
with balanced stereo audio switcher. Provide new, and integrate into system as shown in drawings.
N. Multi-Media Lectern VGA Switcher (VSW-5) - Extron SW4 VGA Ars (quantity: 4) four input VGA
with balanced stereo audio switcher. Provide new, and integrate into system as shown in drawings.
O. Multi-Media Lectern S-VHS VCR (VCR-7) - JVC SR-V1OU S-VHS VCR (quantity: 4). Provide new
with rack mount kit. Install in AV Racks and integrate into system as shown in drawings.
P. Connectors - Connectors to be of the quantity and type as required for proper and durable
operation and signal transmission of the electrical characteristics for associated circuitry.
Microphone connectors: 3-conductor XLR type. Control panels: XLR type with number of
conductors as required. Line level and left/right audio connectors: tip/ring/sleeve 1/4" phone jacks
with insulated bushings. Composite video and RGBS connectors: BNC dual-crimp 75 ohm Canare
or accepted substitution. S-video: standard 4-pin S-video mini-din. Triaxial Video Connectors:
Kings Electronics 7703-3 and 7703-7.
Q. Interconnect Wiring – Provide and install following cable as required for connections in all areas.
Provide required plenum rated bridal reigns and plenum ties. Meet provisions of N.E.C.
Audio Plenum Rated Cable: West Penn 25452, West Penn 25291, or similar.
Composite Video Plenum Rated Cable: West Penn 25806P.
RGBHV Plenum Rated Cable: _ West Penn 258195 or
Belden 1826A or Liberty RGB5C-SD-PLN.
RGBHV UTP Plenum Rated Cable: Extron 22-142-03 Plenum Skew Free AN UTP
Control Plenum Rated Cable: #20 AWG jacketed containing proper number of conductors.
Control CAT-5 Plenum Rated Cable: Extron 22-142-03 Plenum Skew Free A/V UTP.
Triaxial Camera Plenum Rated Cable: Belden 1859A.
Loudspeaker plenum cable: West Penn 25226.
R. Multi-Media Lectern Cable Cubby - Extron 300 Series Cable Cubby (quantity: 4) with
cables/connectors as shown in drawings. Provide new, install in lectern rack and integrate into
system as shown in drawings.
S. Multi-Media Lectern Microphone Mixer (MLMM) - Radio Design Labs ST-UMX3 (quantity: 4). Stick-
on series 3 microphone input, to microphone output level mixer. Use Radio Design Labs ground-
referenced power supply (quantity: 4). Install in Lectern rack and integrate into system as shown in
drawings.
T. Multi-Media Lectern Integrated Control System (LIC-1) - AMX NI-2000 integrated control system.
(quantity: 4). Install in Lectern rack and integrate into system as shown in drawings.
2.6 FIELD PRODUCTS—CLASSROOM
A. Floor Pocket (FP-101) - FSR FL-640P-B-6 floor pocket assemblies provided and installed by
Electrical Contractor. Electrical Contractor will also provide and install one electrical power outlet
within each of these Floor Pockets. Provide custom insert plates for each AV Floor Pocket (quantity:
2 plate each in Floor Pocket, 2 plates) with low-voltage connectors and engraving as shown in
drawings. Provide all low-voltage wiring, and install insert plates as shown in drawings.
B. Floor Box Computer Interface Plate (SAV C12) Extron RGB 460X1 computer interface plate with
balanced stereo audio input (quantity: 1). Provide new, and integrate into system as shown in