Surge Protector User's Manual

ManualsBrandsAmtrol ManualsSurge ProtectorSPT-11

THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND

OTHER HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF

PERSONAL INJURY AS WELL AS PROPERTY DAMAGE.

READ CAREFULLY THE PRODUCT INSTALLATION, OPERATING AND MAINTENANCE MANUAL. FAILURE

TO FOLLOW THE INSTRUCTIONS AND WARNINGS IN THE MANUAL MAY RESULT IN SERIOUS OR FATAL

INJURY AND/OR PROPERTY DAMAGE, AND WILL VOID THE PRODUCT WARRANTY. THIS PRODUCT MUST BE INSTALLED

BY A QUALIFIED PROFESSIONAL. FOLLOW ALL APPLICABLE LOCAL AND STATE CODES AND REGULATIONS, IN THE

ABSENCE OF SUCH CODES, FOLLOW THE CURRENT EDITIONS OF THE NATIONAL PLUMBING CODE AND NATIONAL

ELECTRIC CODE, AS APPLICABLE.

West Warwick, Rhode Island 02893

INSTALLATION & OPERATION

INSTRUCTIONS

SURGE-TROL

™

Surge Arrestor SPT-7 thru SPT-70

MARK OF THE ORIGINATOR

* All SURGE-TROL

™

Series models come with a 1 year warranty. See back page for warranty information.

PN: 9017-140 (05/10)

SURGE-TROL

™

SPT-7

SPT-11

SPT-14

SPT-18

SPT-21

SPT-28

SPT-35

SPT-42

SPT-50

SPT-56

SPT-70

For Models:

Summary of content (4 pages)

PAGE 1
INSTALLATION & OPERATION INSTRUCTIONS SURGE-TROL™ West Warwick, Rhode Island 02893 Surge Arrestor SPT-7 thru SPT-70 SURGE-TROL ™ For Models: SPT-7 SPT-11 SPT-14 SPT-18 SPT-21 SPT-28 SPT-35 SPT-42 SPT-50 SPT-56 SPT-70 THIS IS THE SAFETY ALERT SYMBOL. IT IS USED TO ALERT YOU TO POTENTIAL PERSONAL INJURY AND OTHER HAZARDS. OBEY ALL SAFETY MESSAGES THAT FOLLOW THIS SYMBOL TO REDUCE THE RISK OF PERSONAL INJURY AS WELL AS PROPERTY DAMAGE.
PAGE 2
IMPORTANT GENERAL SAFETY INFORMATION ADDITIONAL SPECIFIC SAFETY ALERTS APPEAR IN THE FOLLOWING INSTRUCTIONS EXPLOSION OR RUPTURE HAZARD A relief valve must be installed to prevent pressure in excess of local code requirement or maximum working pressure designated in the Product Manual, whichever is less. Do not expose Product to freezing temperatures or temperatures in excess of 240° F. Do not exceed maximum allowable working pressure 275 psig.
PAGE 3
SIZING THE SURGE-TROL™ Precise Sizing For Pump Shut-down: Precise Sizing For Pump Start-up: ( AF - Acceptance Factor = 1- ( PP 1 2 )( ) /n SG x 2 x Qs x L P2 + 14.7 449a P1 + 14.7 Volume of Tank in Cubic Feet = P2 + 14.7 1/n -1 P1 + 14.7 Volume of Tank in Gallons = Vv AF ( ) + 14.7 1/n + 14.7 1 ) NOTE: Set pre-charge pressure 15% below static pressure. NOTE: To convert cubic feet to gallons multiply by 7.481. Vv - Vacuum Volume = Qss x Tc x 7.
PAGE 4
AMTROL INC. LIMITED PRODUCT WARRANTY Products covered: all Products manufactured by AMTROL Inc. (“AMTROL”). This warranty cannot be transferred – it is extended only to the original Purchaser or First User of the Product. By accepting and keeping this Product you agree to all of the warranty terms and limitations of liability described below.