Owner manual

75
General Printer - Error Messages Description and Corrective Action
On line: Stock Out Bin 1
Press RESET to Continue
This message indicates no stock is
loaded in BIN 1. This condition is
detected by the Pre-Magnetic Sensor,
which is used to detect the presence of a
coupon when printing from BIN 1.
This error can occur when:
• The printer is out of stock in BIN 1.
• The printer is not sensing the
presence of coupon stock correctly.
• The ZONE 1 ACCESS DOOR is not
closed or latched correctly.
To correct this problem:
1. Unlock and open the BIN 1 ACCESS
DOOR.
2. Load coupon stock into BIN 1.
3. Ensure the ZONE 1 ACCESS DOOR
is closed and latched securely.
4. Close and lock the BIN 1 ACCESS
DOOR.
5. Press the RESET key to clear the
message and continue.