Specification Sheet

The Amprobe LT-10 Lamp Tester is a pocket-sized tool that takes the guesswork

out of troubleshooting uorescent lighting systems. Quickly determine by process

of elimination, whether it’s the bulb, pins, voltage or ballast. The highly responsive

48” antenna, will save you trips up and down the ladder. The LT-10 Lamp Tester

will go from your pocket to answers in seconds.

Troubleshooting Lighting Systems is Easy as 1-2-3:

1. Check if uorescent light bulb is damaged with LAMP and PIN TEST functions

2. Verify if voltage is present at the ballast with VolTect™ non-contact voltage detection

3. If light bulb passes the test in step 1 and the voltage is present in step 2, but the lamp

is still not working, then replace ballast.

LT-10

Lamp Tester

www.Amprobe.com

Goes From Your Pocket to Answers in Seconds

LT-10 SPECIFICATIONS

Speciﬁcations LT-10

Compatible lamps T2, T4, T5, T8, T9, T10, T12 and uorescent energy saving light bulbs

Test voltage Approximately 3 kV / 280 kHz

Field strength Approximately 100 μV/m at 260 - 300 kHz

Maximum antenna length 48"

Filament test T2, T4, T5, T8, T9, T10, T12

VolTect™ non-contact

voltage detection

AC 90 V to AC 600 V, 50/60 Hz

CAT II 300 V, CAT I 600 V

Supplied with 48” antenna, adaptor plate, users manual, battery and carrying case

For more detailed specications see users manual.

• Determineifuorescentlightbulbs

are operational prior to installation or

removal

• Verify voltage presence without the

need for another tool

• Increase productivity by minimizing

trips up and down a ladder

• All tests performed with easy, single

button operation

• Ultra-compact design for portability

• Industry leading 48” removable, fully

retractable antenna

• Insulated antenna sleeve for safe

testing

• Compatiblewithuorescentlightbulbs:

- T2, T4, T5, T8, T9, T10, T12 and

uorescentenergysavinglightbulbs