User's Manual

AP20000G
USER’S GUIDE
49
49
Troubleshooting
The tips in this guide are listed in order of relevance. Try solution (a) before trying solution (b), etc…
Troubleshooting: Web Menu Access Issues
I entered setup.ampedwireless.com and it failed to open the web menu.
a. Make sure your computer is connected to the Access Point wirelessly and NOT using a network cable.
Ensure the power is plugged in and on. Try to access the setup menu again.
b. Enter the following web address into your web browser instead of ‘setup.ampedwireless.com’:
http://192.168.80.240
c. Power off (unplug the power adapter) the Access Point and power it back on. Try again.
d. Try to open your web browser to the default IP address by putting this number into your web browser
instead: 192.168.80.240
e. Reset your Access Point to default settings by holding the Reset Button (located on the back panel) for
ten (10) seconds and try again.
f. If you are using a Static IP, you will need to enter the assigned IP Address into the web browser to
access the web menu. When using a Static IP, the setup.ampedwireless.com shortcut will no longer
work.