7469056COM Wall Cabinet B347469056COMT0 Date of Purchase ___ / ___ / ___ Lot Number: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Do Not Return This Product! Contact our customer service team for help first. Call: 1‐866‐452‐4081 (toll free) Monday‐Friday 9am ‐ 5pm CST Visit: www.systembuild.com WARNING ‐ Unit can tip over causing severe injury or death. ‐ Anchor unit to stud in wall (if instructed to).
Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1‐866‐452‐4081 Monday‐Friday 9am ‐ 5pm CST Visit systembuild.com to view the limited warranty valid in the U.S. and Canada. You Tube Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1‐2 ESTIMATED ASSEMBLY TIME: 1 HOUR ‐ Open your item in the area you plan to keep it to avoid excessive heavy lifting. ‐ Identify, sort and count the parts before attempting assembly.
k Quic bly em Ass Ti p Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification Not actual size B C A 2 end panels 37469056010 top 37469056020 D F E 2 braces 37469000040 bottom panel 37469056030 adjustable shelf 37469056050 left door 37469056060 G right door 37469056070 systembuild.
Board Identification Not actual size B D A G E F A D C systembuild.
Part List Actual Size (x8) #A12105 (x4) #A17300 7/16" pan head (x2) #A11145 1/2" flat head (x2) #A11210 3/4" pan head 3/4" screw (x12) #A13410 1-3/4" flat head (x4) #A13800 2-1/4" flat head (x8) #A21660 (x4) #A80250 wood dowel shelf support (x12) #A24045 screw cap Not Actual Size (x2) #A30030 catch kit (x2) #A52700 (x1) #A55410 (x2) #A61000 latch hinge kit (x1) #A55015 (x1) #A99040 lock systembuild.
STEP 1 (x4) #A12105 (x2) #A30030 Attach two catches to the bottom (B) with screws. B systembuild.
STEP 2 (x1) #A99040 (x8) #A21660 Before inserting the wood dowels into the end panels (A) and braces (D), apply a small amount of glue to each end of the wood dowels. Glue and insert the wood dowels into the braces (D) first. A D D A systembuild.
STEP 3 (x12) #A13410 Attach the top (B) and bottom (C) to the end panels (A) with screws. Head of screws must be flush with surface. B A A C The large hole in the bottom (C) is to be located on the inside of unit. systembuild.
STEP 4 (x4) #A13800 With the help of another person, fasten the braces (D) of the unit to the wall using screws. Assure that the unit is level and that the screws are fastened to studs in the wall. B A D A C systembuild.
STEP 5 (x4) #A80250 (x12) #A24045 Insert four shelf supports. Place the adjustable shelf (E) on the shelf supports. Cover all screwheads with screw caps. B E A A C systembuild.
STEP 6 (x2) (x2) #A12105 #A17300 (x1) #A30030 Attach hinge to left door (F) with screws. Attach the catch to the left door (F). Attach one handle to left door (F) with screws. Attach the latch to left door (F) with screws. F systembuild.
STEP 7 (x2) (x2) #A12105 #A17300 (x1) #A30030 (x2) #A11145 (x1) #A55015 (x2) #A61000 hinge kit Attach hinge to right door (G) with screws. Attach the catch to the right door (G). Attach one handle to right door (G) with screws. Attach the lock to right door (G) with screws. Make sure the lock bar is pointing out. optional G systembuild.
STEP 8 (x2) #A61000 Place the bushing onto the top hinge. Insert the bushing and the hinge into the hole in the bottom (C). While holding onto the door, insert the top hinge and the bushing into the hole in the top (B). Slide the bottom edge of the door into the bottom hinge and fasten with two screws as shown. Repeat for the other door. Please note, the holes in the hinges and the plastic catches are slotted for adjustment. B 1st G C F 2nd systembuild.
STEP 9 To lock the doors: 1. Close the left door (F) first so that the plastic catches engage. Extend the barrel of the lock down into the hole in the bottom (C). 2. Close the right door (D) so the plastic catches engage. Insert the key into the lock and turn. This will position the lock bar behind the left door (B). Remove the key. 1st 2nd systembuild.
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 0 lbs 0 kg 25 lbs 11.3 kg 30 lbs 13.6 kg Warning: Risk of injury to persons ‐ do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details ‐ sneak peek on what's new * Surveys ‐ have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit systembuild.
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1‐866‐452‐4081 (Gratis) Lunes ‐ Viernes 9am ‐ 5pm CST Visitar: www.systembuild.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte. Anclar el mueble a un poste de madera en la pared (si esto se requiere).
Español Página 7 Une las dos agarraderas a la parte de abajo (B) usando tornillos. Página 8 Antes de insertar los pasadores de madera a los paneles del extremo (A) y a las abrazaderas (D), aplica una pequeña cantidad de pegamento sobre ambas superficies de los pasadores de madera. Pega e inserta los pasadores a las abrazaderas (D) primero. Página 9 Une la parte superior (B) e inferior (C) de los paneles del extremo (A) usando tornillos. La cabeza de los tornillos debe estar al mismo nivel de la superficie.
Español Página 14 Coloca el cojinete en la parte superior de la bisagra. Inserta el cojinete y la bisagra en el agujero al fondo de (C). Mientras sostienes la puerta, inserta la bisagra superior y el cojinete en el agujero en la parte superior de (B). Desliza la parte inferior de la puerta en la bisagra inferior y ajusta usando dos tornillos de la forma en que se muestra. Repite los pasos con la otra puerta.
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐nous: 1‐866‐452‐4081 (sans frais) du Lundi au Vendredi de 9h à 17h Heure Centrale Visitez: www.systembuild.com ATTENTION Le meuble peut basculer et causer des blessures graves ou la mort.
Français Page 7 Attacher deux loquets au bas (B) avec des vis. Page 8 Avant d'insérer les goujons en bois dans les panneaux d'extrémité (A) et dans les contrevents (D), appliquer une petite quantité de colle à chaque bout des goujons en bois. Coller et insérer les goujons en bois dans les contrevents (D) en premier. Page 9 Attacher le haut (B) et le bas (C) aux panneaux d'extrémité (A) avec des vis. Les têtes des vis doivent être égalisées avec la surface.
Français Page 15 Pour verrouiller les portes : 1. Fermer la porte gauche (F) en premier pour que les butées en plastique s'engrènent. Étendre le baril de la serrure dans le trou dans le bas (C). 2. Fermer la porte droite (D) pour que les butées en plastique s'engrènent. Insérer la clé dans la serrure et tourner. Cela positionnera la barre de verrouillage derrière la porte gauche (B). Retirer la clé. Page 16 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées.