Full Product Manual

Stainless Steel Utility Sink

Assembly Instructions

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper assembly. Every effort has been

made to ensure the accuracy of this manual. These instructions are not meant to cover every possible

condition and situation that may occur. We reserve the right to change this product at any time without

prior notice.

IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE, DO

NOT OPERATE THIS PRODUCT!

HAVE QUESTIONS OR PROBLEMS? CONTACT CUSTOMER SERVICE.

If you experience a problem or need parts for this product, visit our website http://www.buffalotools.com

or call our customer help line at 1-636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the

sales receipt is required.

FOR CONSUMER USE ONLY – NOT FOR PROFESSIONAL USE.

KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE

REFERENCE.

ITEM # SSUSK1816

PAGE 1
ITEM # SSUSK1816 Stainless Steel Utility Sink Assembly Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper assembly. Every effort has been made to ensure the accuracy of this manual. These instructions are not meant to cover every possible condition and situation that may occur. We reserve the right to change this product at any time without prior notice.
PAGE 2
ITEM # SSUSK1816 STAINLESS STEEL UTILITY SINK A B 1 piece sink body 4 pieces leg w/feet E 8 pieces hex screws F 1 piece drainer 1 C B B G 1 piece hanging bar B 2 pieces screws for hanging bar 2 B D 1 piece hex wrench H 2 pieces plastic tubbing for hanging bar E C D D C A E Place the sink (A) upside down on the floor. Use the hex wrench (D) to remove 8 pcs hex screws (C) from four corner support of sink (A). Insert each leg (B) into each corner support of sink (A).