Bath Accessories Assembly & Installation Instructions

ManualsBrandsAmerican Standard ManualsIndoor FurnishingTowel and Storage Locker 9442.000

730798-100

Product names listed herein are trademarks of American Standard Inc.

ASSEMBLY & INSTALLATION

INSTRUCTIONS

BATH ACCESSORIES

Towel and Storage Locker 9442.000

Ladder Bath Cabinet 9443.000

- 1 -

Recommended Tools & Materials

Your ladder kit includes the following:

LADDER BATH CABINET 9443.000

Roughing-in Dimensions

To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes

fading. Also avoid extreme changes in temperature by arranging furniture away from radiators, heat

and air vents, and air conditioning units. Avoid placing furniture directly under windows.

Phillips Screwdriver

Tape Measure

Rubber Mallet

COLLECTION

™

“ ”

THE

Thank you for selecting our products...products which have been the benchmarks of fine

quality for over 100 years. To help insure that the installation process will proceed smoothly,

please read these instructions carefully before you begin. Also, review the recommended

tools and materials list; carefully unpack and examine your new plumbing fixture.

18-1/2

(470mm)

(508mm)

(1372mm)

(508mm)

CODE NAME FIGURE QTY

LOWER STORAGE1

1 PC

4 PCS

1 PC

LEFT SIDE

LADDER RAIL

RIGHT SIDE

LADDER RAIL

LOWER DISPLAY

SHELF

UPPER DISPLAY

SHELF

FEET

PARTS LIST

4 PCS

8 PCS

12 PCS

4 PCS

SCREWS (a)

STOPPERS

SCREWS (b)

DOWELS

PLASTIC

COVERS

CAM LOCKS

CAM BOLTS

CODE NAME FIGURE QTY

LADDER MOUNTING HARDWARE KIT

It is recommended that you allow yourself ample

space to work. Assembly is easiest on a smooth,

protected surface.

Summary of content (4 pages)

PAGE 1
ASSEMBLY & INSTALLATION INSTRUCTIONS THE “ ” COLLECTION ™ by BATH ACCESSORIES Towel and Storage Locker 9442.000 Ladder Bath Cabinet 9443.000 Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
PAGE 2
1 Shelving Unit Assembly Insert 8 wooden dowels into drilled holes located on the upper and lower shelves. Lay the right side rail flat with the drilled side facing up. Slide the upper and lower shelves into place by inserting the wooden dowels into the drilled dowel holes located on the side ladder rails. Fasten the shelves with 2 large flat head phillips screws. Repeat the last two steps above to attach the left side ladder rail. Conceal the phillips screws with the plastic stoppers.
PAGE 3
Attach Shelf Unit to Drawer Unit Insert 4 cam locks into lower support arms located on left and right side rails. Insert 4 wooden dowels and screw 4 cam bolts into drilled holes located on drawer unit top. Line up the drilled holes on shelf unit base with the wooden dowels and cam bolts. Slide the shelf unit into place. Use a phillips head screw driver to tighten the cam locks. Conceal the cam locks with the plastic covers. Use a rubber mallet to carefully tap the covers into place.
PAGE 4
Care and Cleaning Dust the wood frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis. Clean the surface by rubbing in the direction of the grain. Use polishes that contain detergents, emulsifiers and mineral oil. Avoid using silicone cleaners and waxes. Clean up excess water and spills immediately. Use a blotting rather than a wiping action. Water left over a long period of time will cause white spots in the finish. REPAIR PARTS REPAIR PART NO.