Installation Sheet

M965959 Rev. 1.0 (9/20)
2
REMOVE EXPOSED PLASTER GUARD
1
• Cut the exposed part of the PLASTER GUARD (1) ush with the nished oor. Be careful not to damage the oor.
• Place GASKET (2) under BASE PLATE (3).
• Secure BASE PLATE (3) with SCREWS (4) to
the PLASTER GUARD (1).
HOT
COLD
FRONT
FINISHED FLOOR
2
• Remove the SIX RETAINING PLATE SCREWS (2)
with a (5 mm) hex wrench.
• Remove RETAINING PLATE (3).
REMOVE RETAINING PLATE AND SCREWS
HOT
COLD
FRONT
FINISHED FLOOR
2
3
5mm HEX
WRENCH
1
3
2
4