Specifications and Installations

ManualsBrandsAmerican Standard ManualsShower FaucetsAmerican Standard Times Square 2.5 GPM Shower System with Single Function Rainshower - Includes Trims, Handshower System, Rough Ins

B37

TIMES SQUARE

PRESSURE BALANCE BATH/SHOWER FITTING

MODEL NUMBER:

TRIM KITS:

T184.502 Times Square BATH/SHOWER Trim Kit

Metal Lever Handle. LESS Valve Body.

T184.501 Times Square SHOWER ONLY Trim Kit

Metal Lever Handle. LESS Valve Body.

T184.500 Times Square VALVE ONLY Trim Kit

Metal Lever Handle. LESS Valve Body.

For use with R110 Series Pressure Balance Valves.

See reverse side for available Rough Valves.

T184.502 Bath/Shower Trim Shown

T184.502 Bath/Shower Tr im Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.

T184.501 Shower Only Tr im Kit. Metal Lever Handle. FloWise Showerhead. LESS Valve Body.

Finish Options

Product

Number

Description

Polished

Chrome

002

PVD

Satin

Nickel

295

TRIM KITS *

* TRIM & ROUGH MUST BE ORDERED SEPARATELY.

T184.500 Valve Tr im Only . Metal Lever Handle. LESS Valve Body.

BOTTOM OF TUB

4-7/8" REF.

(124 mm)

1/2" NPT

1-5/8" TO 3-1/4"

(41 mm TO 83 mm)

1/2"

COPPER

8-1/4"

(210 mm)

OPTIONAL TO

FINISHED

FLOOR USUALLY

BETWEEN 65''

AND 80''

(1651 AND 2032 mm)

TOP OF TUB RIM

FINISHED WALL

4-1/4" REF.

(108 mm)

7- 13/16" REF.

(199 mm)

11-13/16" REF.

(300 mm)

1-1/2" REF.

(38 mm)

74" (1880 mm)

FOR HEAD

CLEARANCE

18"

(457 mm)

OPTIONAL

4" REF.

(102 mm)

5-1/4"

(133 mm)

FLOW RATE*

GALLONS PER MINUTE

INLET PRESSURE (PSI)

*Flow rates shown are for mixed hot and cold.

Shower

Spout

10080604020

OFF

1/2"

NPT

1-1/4"

(32 mm)

DIA. HOLE

4" REF.

(100 mm)

4-7/8" REF.

(124 mm)

GENERAL DESCRIPTION:

SHOWERHEAD

Brass 8" Square Rain Showerhead at maximum

2.5 gpm/9.5 L/min. flow rate. 12" Brass right angle

shower arm.

WALL TUB SPOUT

Metal slip-on diverter spout.

WALL VALVE TRIM

Available with metal lever handle.

Metal wall escutcheon.

SUGGESTED SPECIFICATION:

Bath/shower fitting shall feature brass square rain showerhead with Max. 2.5 gpm/9.5 L/min. flow rate. Fitting shall be:

American Standard -

Tr im Kit Model #

T184.50_.___ and Valve Body Model # R11_.

CODES AND STANDARDS

These products meet or exceed the

following codes and standards:

ANSI A 117. 1

ASSE 1016

ASME A112.18.1

CSA B 125.1

*To modify a product, add suffix after the

digit (ex. T064ITP502.002)

IPS Spout

Factory

Installed

Decal Ring

(Red/Blue)

___IPT

___WD

Modifications

Parts

Suffix*

R111

R111SS

R110

R110SS

R115

R115SS

R117

R117SS

R118

R118SS

R119

R119SS

Rough Valve Body less trim. Universal inlets/outlets.

Rough Valve Body less trim. Universal inlets/outlets with Screwdriver Stops.

Rough Valve Body less trim. Direct sweat inlets/outlets.

Rough Valve Body less trim. Direct sweat inlets/outlets with Screwdriver Stops.

Rough Valve Body less trim. Female Thread inlets/outlets.

Rough Valve Body less trim. Female Thread inlets/outlets with Screwdriver Stops.

Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807).

Rough Valve Body less trim. PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807)

with Screwdriver Stops.

Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960).

Rough Valve Body less trim. PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960)

with Screwdriver Stops.

Rough Valve Body less trim. CPVC inlets/universal outlets.

Rough Valve Body less trim. CPVC inlets/universal outlets with Screwdriver Stops.

Product

Number

Description

ROUGH VALVE BODIES

Meets the American Disabilities Act Guidelines and ANSI A117.1

Requirements for the physically challenged.

Revised 5/15

Summary of content (18 pages)

PAGE 1
TIMES SQUARE® PRESSURE BALANCE BATH/SHOWER FITTING MODEL NUMBER: TRIM KITS: T184.502 Times Square BATH/SHOWER Trim Kit Metal Lever Handle. LESS Valve Body. T184.501 Times Square SHOWER ONLY Trim Kit Metal Lever Handle. LESS Valve Body. T184.500 Times Square VALVE ONLY Trim Kit Metal Lever Handle. LESS Valve Body. H For use with R110 Series Pressure Balance Valves. See reverse side for available Rough Valves. C OFF FINISHED WALL T184.502 Bath/Shower Trim Shown 4-1/4" REF. (108 mm) 7-13/16" REF.
PAGE 2
TIMES SQUARE® PRESSURE BALANCE BATH/SHOWER FITTING CODES AND STANDARDS FLOW RATE* These products meet or exceed the following codes and standards: GALLONS PER MINUTE 8 ANSI A 117.1 ASSE 1016 ASME A112.18.1 CSA B 125.1 6 4 2 0 Parts Suffix* Modifications Spout Shower 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. 4" REF. (100 mm) ___IPT IPS Spout 1/2" NPT 4-7/8" REF. 1-1/4" (32 mm) (124 mm) DIA.
PAGE 3
TIMES SQUARE™ IN-WALL DIVERTER VALVES MODEL NUMBER: TRIM KITS: T184.430 Diverter Valve Trim Valve Trim ONLY. LESS Valve. ROUGH VALVE BODIES: R420 Two-Way In-Wall Diverter Valve Rough 1/2" NPT inlets/outlets. Less Handle. R430 Three-Way In-Wall Diverter Valve Rough 1/2" NPT inlets/outlets. Less Handle. NOTE: Cannot be used as a shut-off valve. ALL CONNECTIONS 1/2" NPT FINISHED WALL 2-5/8" MAX. (66mm) 2-3/4" (70mm) 2-3/4" (71mm) 3-1/4" (83mm) 1-5/8" MIN.
PAGE 4
TIMES SQUARE™ IN-WALL DIVERTER VALVES CODES AND STANDARDS GALLONS PER MINUTE FLOW RATE - R420 These products meet or exceed the following codes and standards: ASME A112.18.1 Port A 16 14 12 10 8 6 4 2 0 Tub Port 20 30 40 50 60 70 80 INLET PRESSURE (PSI) GALLONS PER MINUTE FLOW RATE - R430 Port A/B Tub Port 16 14 12 10 8 6 4 2 0 20 30 40 50 60 70 80 ROUGH VALVE BODIES TRIM KITS** INLET PRESSURE (PSI) Finish Options Product Number Description T184.430 Diverter Valve Trim.
PAGE 5
SHOWER SYSTEMS TIMES SQUARE™ SHOWER SYSTEM KIT MODEL NUMBER: 1662.184 Shower System Kit Includes: • Single Function Wand Style Hand Shower 8888.035 • Hose 8888.069 • Square Brass Wall Supply 1660.30 • 30" Square Slide Bar 2-1/8" (54mm) 30" (762mm) 1-1/4" (29mm) 1/2" (13mm) 1/2" NPT (48" - 60") (OPTIONAL) TO FINISHED FLOOR 13/16" (20mm) 1-3/8" (35mm) 24-5/8" (626mm) 3-1/2" (89mm) 2-1/4" (57mm) 1-15/16" (49mm) SQ.
PAGE 6
SHOWER SYSTEMS TIMES SQUARE™ SHOWER SYSTEM KIT CODES AND STANDARDS FLOW RATE Hand Shower 3 GALLONS PER MINUTE Install as required to comply with local code requirements. ASME A112.18.1 CSA 125 2 1 0 20 40 60 80 100 INLET PRESSURE (PSI) Finish Product Number 1662.184 Polished Chrome Description 002 Satin Nickel PVD 295 Shower System Kit. Contains single function wand hand shower, hose, wall supply and slide bar. F100 © 2013 AS America Inc.
PAGE 7
Installation Instructions TIMES SQUARE™ 1662.184 SHOWER SYSTEM KIT Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1 M 9 6 5 4 5 2 R E V. 1.
PAGE 8
1 INSTALLATION INSTRUCTIONS The SLIDE BAR (1) works best when secured to the wall studs or cross brace using the WOOD SCREWS. If a mounting into the studs is not possible, use appropriate wall fasteners provided to secure the installation. Mark a vertical center line in the location you wish to install the SLIDE BAR (1). NOTE: The height from the finished floor is optional. See rough-in drawing for suggested dimensions.
PAGE 9
2 INSTALL WALL SUPPLY CAUTION Turn off hot and cold water supplies before beginning. WALL SUPPLY (1) is 1/2" NPT. See rough-in above for detailed information. Install O-RING (2) onto back of WALL SUPPLY (1). Apply sealant or teflon tape to threads of 1/2" NPT supply nipple. Tighten ELBOW (1) onto the inlet pipe nipple with a smooth jaw wrench. WALL SUPPLY (1) should be tight against finished wall.
PAGE 10
TIMES SQUARE™ SHOWER SYSTEM KIT MODEL NUMBER 1662.184 M964889-0070A SET SCREW KIT M950332-YYY0A HAND SHOWER 8888069.YYY WALL SUPPLY M964236-0070A MOUNTING KIT 030782-YYYOA HOSE KIT M964888-YYYOA HAND SHOWER HOLDER Replace the "YYY" with appropriate finish code CHROME SATIN NICKEL 002 295 HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8:00 p.m.
PAGE 11
TIMES SQUARE™ SHOWER SYSTEM KIT MODEL NUMBER 1662.184 M964889-0070A SET SCREW KIT M950332-YYY0A HAND SHOWER 8888069.YYY WALL SUPPLY M964236-0070A MOUNTING KIT 030782-YYYOA HOSE KIT M964888-YYYOA HAND SHOWER HOLDER Replace the "YYY" with appropriate finish code CHROME SATIN NICKEL 002 295 HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:00 a.m. to 8:00 p.m.
PAGE 12
ROUGH VALVES IN-WALL THREE-WAY DIVERTER VALVES MODEL NUMBER: ❏ R433 Three-Way In-Wall Diverter Valve Rough (Discrete) 1/2" NPT inlets/outlets. 3 Discrete functions. Less Handle. ❏ R433S Three-Way In-Wall Diverter Valve Rough (Shared) 1/2" NPT inlets/outlets. 3 Discrete/3 Shared functions. Less Handle.
PAGE 13
ROUGH VALVES IN-WALL THREE-WAY DIVERTER VALVES CODES AND STANDARDS GALLONS PER MINUTE These products meet or exceed the following codes and standards: ASME A112.18.1 CSA B125.1 16 14 12 10 8 6 4 2 0 FLOW RATE - R433 Port A/B Tub Port 20 30 40 50 60 70 80 INLET PRESSURE (PSI) Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.
PAGE 14
61(3"%"#-& 13&4463& #"-"/$& #"5) 4)08&3 '*55*/( 5&.1&3"563& $0/530- 7"-7& MODEL NUMBER: R110 Pressure Balance Rough Valve Body only Direct sweat inlets/outlets. LESS trim. R110SS Pressure Balance Rough Valve Body only with Screwdriver stops Direct sweat inlets/outlets. Screwdriver stops. LESS trim. R115 Pressure Balance Rough Valve Body only Available Trim Kits Colony Tropic Dazzle Of Female thread inlets/outlets. LESS trim.
PAGE 15
61(3"%"#-& 13&4463& #"-"/$& #"5) 4)08&3 '*55*/( 5&.1&3"563& $0/530- 7"-7& Valve + Trim: Trim Kit & Valve Body Packaged Separately FLOW RATE* 8 GALLONS PER MINUTE To order: Specify valve body and trim kit desired Example: R110 - Direct Sweat Valve Body T215.701 - Hampton Bath/Shower Trim Kit (Porcelain Cross Handle) Spout 6 4 2 0 20 40 60 80 100 INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold.
PAGE 16
53*. ,*54 '03 5&.1&3"563& $0/530- 7"-7&4 Trim Kits for R110, R110SS, R115, R115SS, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. Model # Description Trim Kit COLONY T375.120 BATH/SHOWER Trim Kit • Wall escutcheon • Lever handle • "Easy Clean" Showerhead • Shower arm and flange • Slip-on Diverter tub spout Finishes Roughing-In Dimensions 41mm TO 83mm (1-5/8" TO 3-1/4") FINISHED WALL .002 Polished Chrome 102mm (4") REF.
PAGE 17
53*. ,*54 '03 5&.1&3"563& $0/530- 7"-7&4 Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. Model # Description Trim Kit DAZZLE H T028.501 SHOWER ONLY Trim Kit • Metal Lever Handle • Brass wall escutcheon • Showerhead, arm and flange ff ot Roughing-In Dimensions T028.
PAGE 18
53*. ,*54 '03 5&.1&3"563& $0/530- 7"-7&4 Trim Kits for R110, R110SS, R115, R115SS, R010, R015, R117, R117SS rough valve bodies. Showerhead with 2.5gpm/9.5L/min. maximum flow. TRIM KITS ONLY. VALVE MUST BE ORDERED SEPARATELY. Trim Kit Model # Description ENFIELD ENFIELD AMARILIS *Finishes T373.522 BATH/SHOWER Trim Kit • Metal wall escutcheon • Metal cross handle • Cast brass shower arm • 3-1/4" adjustable showerhead • Cast brass diverter tub spout with I.P.S. connection T373.