Installation Guide

ManualsBrandsAmerican Standard ManualsTub FillersAmerican Standard Studio S Deck Mounted Roman Tub Filler with Built-In Diverter

- 1 -

Product names listed herein are trademarks of AS America, Inc.

Thank you for selecting American Standard...

the benchmark of ﬁne quality for over 140 years.

To ensure that your installation proceeds smoothly-please read

these instructions carefully before you begin.

RECOMMENDED TOOLS

ROUGHING-IN DIMENSIONS

INSTALL SPOUT

STUDIO

DECK MOUNT BATH FILLER

INSTALLATION

INSTRUCTIONS

T105900

T105901

Certied to comply with ANSI A112.18.1M

CAUTION

Turn off hot and cold water

supplies before begining.

M965957 (7/18)

12" MIN.

(305 mm)

1" MAX.

(25 mm)

4-5/8"

(118 mm)

2-1/2"

(64 mm)

2-15/16"

(74 mm)

4-3/4"

(120 mm)

5-11/16"

(145 mm)

7-13/16"

(199 mm)

9-7/16"

(240 mm)

12"

(306 mm)

Adjustable Wrench

Channel Locks

Flat Blade Screwdriver

Phillips Screwdriver

Hex Wench

(supplied)

Hex wench

(supplied)

RECESS

MOUNTING

SURFACE

• Thread DIVERTER INSERT (5) carefullyit touches the

installation surface, be sure the RUBBER RING (4)

is properly seated in it’s RECESS at the base of the

SPOUT (1).

• Thread SET SCREW (3) using 5 mm hex wrench supplied.

Make certain SET SCREW (3) is properly aligned and tight

so that SPOUT (1) is locked in place.

• Install PLUG BUTTON (2).

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS T105900 T105901 STUDIO®S DECK MOUNT BATH FILLER Thank you for selecting American Standard... the benchmark of fine quality for over 140 years. To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
PAGE 2
VALVE ASSEMBLY • Remove PLASTER GUARDS. • Thread INSERT (1) into SIDE VALVE (2) until it touches the installation surface. • Thread INSERT (3) into SIDE VALVE (4) until it touches the installation surface. 3 • Tighten COUPLING (5) into TEE (6) for products without hand shower. 1 VALVE LOCKING FITTING MOUNTING DECK COLD VALVE LOCKING 4 SPOUT SHANK 6 5 HOT 2 3 INSTALL HANDLES • Turn VALVE to OFF position.
PAGE 3
4 HANDSHOWER INSTALLATION • Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge (12" max from SPOUT center) with SPRAY ESCUTCHEON (1) directed towards tub center. Be sure RUBBER RING (2) is properly seated in ESCUTCHEON (1). Install RUBBER WASHER (3) and LOCKNUT (4) from underside of ledge. • Secure SPRAY ESCUTCHEON (1) by tightening LOCKNUT (4). • Add SEAL WASHER (5) and connect HOSE (10) to outlet nipple at the bottom of TEE (7). Tighten firmly.
PAGE 4
STUDIO®S DECK MOUNT BATH FILLER M970261-0070A SPOUT SCREW MODEL NUMBERS T105900 T105901 M910270-0070A AERATOR M970549-YYY0A LEVER HANDLE M970550-YYY0A ESCUTCHEON M911705-0070A SEAL SPOUT 030278-0070A TRANSFER SEAL KIT M970507-0070A TRANSFER ROD ASSEMBLY (T353901) M911116-0070A SPACER VALVE M970477-0070A SHANK SLEEVE KIT (T353901) 918555-0070A HANDLE SCREW M918068-0070A HANDLE ADAPTER M950535-0070A VALVE KIT 1660609.