Operating instructions

Pub. No. 18-HE56D1-9 11
Installer's Guide
21. Install the Power Door. The door can be installed in either
direction. Determine which direction will best allow access
to the latches and 24 Volt power cord. Insert the 2 tabs on
the door behind the front cabinet flange and rotate the door
into the closed position. Rotate the two quarter-turn latches
on the Power Door inward. See Figures 33, 34 and 35.
After final checkout of the Upgrade Kit, remove door and
lock Field Charger into place.
20. Measure and cut the provided gasket to the length of the
gasket channel as shown in Figure 32. Place gasket
material into the two channels located at each side of the
opening as shown in Figure 32.
AFTER INSTALLATION
BEFORE INSTALLATION
GASKET CHANNEL
Figure 32
Figure 33
Figure 34
Figure 35
Latches shown in open
position
Handles to be used when opening
and closing power door
Latches
are
turned
outward
when
door
is open
Position door
tabs
under channel
for proper door
installation