Specification Sheet
© 2018 AS America Inc.
1
Flash
™
Rough Valve Bodies
8/18
MODEL NUMBERS:
❏ RU101 Flash Rough Valve Body with
Flash Connections
½" Universal inlets/outlets.
❏ RU101SS Flash Rough Valve Body with Flash
Connections with Screwdriver Stops
½" Universal inlets/outlets.
❏ RU102 Flash Rough Valve Body with Stub-Out
Connections
½" Stub-out inlets/outlets.
❏ RU102SS Flash Rough Valve Body with Stub-Out
Connections with Screwdriver Stops
½" Stub-out inlets/outlets.
❏ RU107 Flash Rough Valve Body with PEX Crimp
Connections
½" PEX Crimp inlets (ASTM F1807) / Universal outlets.
❏ RU107SS Flash Rough Valve Body with PEX Crimp
Connections with Screwdriver Stops
½" PEX Crimp inlets (ASTM F1807) / Universal outlets.
❏ RU107E Flash Rough Valve Body with PEX Crimp
Elbow Connections
½" PEX Crimp Elbow inlets (ASTM F1807) / Universal outlets.
❏ RU107ESS Flash Rough Valve Body with PEX Crimp El-
bow Connections with Screwdriver Stops
½" PEX Crimp Elbow inlets (ASTM F1807) / Universal outlets.
❏ RU108 Flash Rough Valve Body with PEX Cold
Expansion Connections
½" PEX Cold Expansion inlets (ASTM F1960) / Universal outlets.
❏ RU108SS Flash Rough Valve Body with PEX Cold
Expansion Connections with Screwdriver Stops
½" PEX Cold Expansion inlets (ASTM F1960) / Universal outlets.
❏ RU108E Flash Rough Valve Body with PEX Cold
Expansion Elbow Connections
½" PEX Cold Expansion Elbow inlets (ASTM F1960) /
Universal outlets.
❏ RU108ESS Flash Rough Valve Body with PEX Cold
Expansion Elbow Connections with Screwdriver Stops
½" PEX Cold Expansion Elbow inlets (ASTM F1960) /
Universal outlets.
❏ RU109 Flash Rough Valve Body with CPVC
Connections
½" CPVC inlets / Universal outlets.
❏ RU1098SS Flash Rough Valve Body with CPVC
Connections with Screwdriver Stops
½" CPVC inlets / Universal outlets.
GENERAL DESCRIPTION:
Valve body features cast brass construction with a pre-installed
test cap. Features back-to-back capability. One-half inch
inlets and outlets (choice of Universal, PEX Crimp, PEX
Cold Expansion, CPVC or Stub-outs). Features test cap
with stainless steel retaining ring with ats. Available with
screwdriver stops. Rough-in plaster guard designed as
rough-in guide and for use as thin wall mounting support.
For use with TU series trim kits with cartridges.
PRODUCT FEATURES:
Choice of Connections: Fast and easy installation without
adaptors reducing leak points. Available connections include
Universal (male thread/female sweat), PEX Crimp, PEX Cold
expansion, CPVC, and Stub-outs.
Cast Brass Valve Body: Durable. Ideal material for prolonged
contact with water.
Flat Back: Allows valve to be mounted ush against cross
brace for easy and solid installation.
Test Cap: Allows valve body to be tested and ushed without
the presence of the valve cartridge. Can be tested using test
cap with air (200 psi) or water (300 psi).
Stainless Steel Retaining Ring with Flats: Secures test cap/
cartridge in place and eliminates need for screws. Flats make
it simple to loosen ring for quick, easy insertion/removal of test
cap/cartridge.
Back-to-Back Capability: Hot and cold can be reversed
quickly and easily.
Exclusive Plaster Guard: Plaster guard is designed to protect
valve and act as a guide during installation. It can serve as
mounting support for thin-wall installations.
Wide Rough-in Range: From 1-3/4" to 2-3/4" from finished
wall to the back of the valve.
RU101 SHOWN
SUGGESTED SPECIFICATION
Rough Valve Body shall feature a cast brass body. Shall feature back-to-back capability. Valve Body shall feature test cap to
ush and test the lines. Shall feature stainless steel retaining ring with ats. Rough Valve Body shall be: Rough Valve Body -
American Standard Model # RU10___.