Installation Instructions R520 TOP CENTRAL THERMOSTAT WITH VOLUME CONTROL Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.1M ASSE 1016 M968255Rev.1.
1 ROUGHING-IN THE VALVE WARNING DO NOT SOLDER DIRECTLY TO THE VALVE BODY; THIS WILL DAMAGE THE TEMPERATURE CONTROL ELEMENT AND CHECK STOP VALVES. MIXED COLD Prepare water supplies per ROUGHING-IN DIMENSIONS. Make sure the finished wall is between the minimum and maximum rough dimension. Install VALVE at indicated height and depth. Make sure the "TOP" marking on the PLASTER GUARD is up. TOP Connect the hot and cold water supplies. Assemble all connecting pipes. Flush lines to remove any dirt.
CENTRAL THERMOSTAT WITH VOLUME CONTROL MODEL NUMBER R520 953950-0070A CHECK STOP (COLD BLUE) 994053-0070A CARTRIDGE A918572-0070A CARTRIDGE SCREW 923348-0070A HANDLE ADAPTER 953963-0070A 953960-0070A HANDLE EXTENSION THERMOSTAT CARTRIDGE 953951-0070A CHECK STOP (HOT RED) 912647-0070A O-RING 953957-0070A TEMPERATURE CALIBRATION UNIT 963434-YYY0A DEEP ROUGH KIT ( S O L D S E PA R AT E LY ) HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1-800 442-1902 Weekdays 8:
Installation Instructions R540 TOP 3/4" CENTRAL THERMOSTAT WITH VOLUME CONTROL Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. Certified to comply with ANSI A112.18.
1 ROUGHING-IN THE VALVE WARNING DO NOT SOLDER DIRECTLY TO THE VALVE BODY; THIS WILL DAMAGE THE TEMPERATURE CONTROL ELEMENT AND CHECK STOP VALVES. MIXED COLD Prepare water supplies per ROUGHING-IN DIMENSIONS. Make sure the finished wall is between the minimum and maximum rough dimension. Install VALVE at indicated height and depth. Make sure the "TOP" marking on the PLASTER GUARD is up. TOP Connect the hot and cold water supplies. Assemble all connecting pipes. Flush lines to remove any dirt.
3/4" CENTRAL THERMOSTAT WITH VOLUME CONTROL MODEL NUMBER R540 912647-0070A O-RING A953971-0070A CHECK STOP (COLD BLUE) A994352-0070A CARTRIDGE 923348-0070A HANDLE ADAPTER 918428-0070A CARTRIDGE SCREW 953963-0070A 954040-0070A HANDLE EXTENSION THERMOSTAT CARTRIDGE A953972-0070A CHECK STOP (HOT RED) 912647-0070A O-RING 953957-0070A TEMPERATURE CALIBRATION UNIT 963434-YYY0A DEEP ROUGH KIT ( S O L D S E PA R AT E LY ) HOT LINE FOR HELP For toll-free information and answers to your questions, ca
