Installation Guide

9a 9c

9b 9d

INSTALLING EXTERIOR AND INTERIOR HANDLE SETS

• In this step, you’ll need following parts: [8] x1, [16] x1, [17] x1

9a. Unscrew both threaded nuts from Exterior Handle Set [16] and separate parts as illustrated. Install

Exterior Handle on the outside of the Exterior Door Panel [21] and place the threaded nut through hole in

glass from inside of door panel, ensuring plastic spacer is over threads of nut and contacting glass. Place

Exterior Door Handle [16] to threaded nut while also ensuring the second plastic spacer on the Exterior

Handle side is contacting the glass panel on the outside. Screw into place.

CAUTION: Ensure that

the 2 plastic spacers are between the glass panel or damage to the glass door can occur.

9b. Tighten thread nut using supplied Allen Key [8]. A hole in the head of the nut provides a location to place

Allen Key into to turn and tighten the nut.

CAUTION: Do not over tighten or damage to glass panel may occur

9c. Unscrew both threaded nuts from Interior Handle Set [17] and separate parts as illustrated. Install Interior

Handle on the inside of the Interior Door Panel [22] and place the threaded nut through hole in glass from

outside of door panel, ensuring plastic spacer is over threads of nut and contacting glass. Place Interior

Door Handle to threaded nut while also ensuring the second plastic spacer on the Interior Handle side is

contacting the glass panel on the inside. screw into place (ref. illustration).

CAUTION: Ensure that the

2 plastic spacers are between the glass panel or damage to the glass door can occur.

9d. Tighten thread nut using supplied Allen Key [8]. A hole in the head of the nut provides a location to place

Allen Key into to turn and tighten the nut.

CAUTION: Do not over tighten or damage may occur.