Instructions / Assembly

7301963-100
- 2 -
BACK-TO-BACK INSTALLATION
Recommended fitting type for
back-to-back installations.
Depending upon your plumbing and venting conditions, the flow from the Champion
®
4 MAX in a
back-to-back installation may create a vacuum on the system and draw water from the opposing
bowl. The National Standards Plumbing Code prohibits the use of a cross fitting for drainage as
throw over is possible. The code does approve a directional "Y" style fitting with proper venting to
direct the water downward and away from the other toilet.
Press firmly.
Wax Ring
(sold separately)
1 2
Turn Off Water Supply
Flush to remove
water from tank;
sponge remaining
water from
bowl before
removing toilet.
Clean Flange
Before You Start:
If Removing An Existing Toilet
!
Caution: If leaving floor flange
open for more than 1-2 hours,
cover flange to prevent escaping
sewer gases.
ROUGHING-IN DIMENSIONS: NOTE: Distance from wall to closet flange centerline must be as listed below: 12" (305mm)
Champion
®
4 MAX 231AA Series Right Height
®
Elongated HET Champion
®
4 MAX 231BA Series Right Height
®
Round Front HET
30-1/4"
(768mm)
9-3/16"
(234mm)
1" (26mm)
3-9/16" (90mm)
10-9/16"
(268mm)
31-1/8"
(791mm)
16-1/2"
(419mm)
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ'D
C/L OF OUTLET
6"
(152mm)
*10"
(254mm)
18-1/2"
(470mm)
C/L OF SEAT POST HOLES
5-1/2" (140mm CENTERS)
12"
(305mm)
13-13/16"
(351mm)
9-3/8"
(238mm)
17-3/8"
(441mm)
14"
(356mm)
17-3/8"
(441mm)
28-1/4"
(718mm)
9-3/16"
(234mm)
1" (26mm)
3-9/16" (90mm)
10-9/16"
(268mm)
31-1/8"
(791mm)
16-1/2"
(419mm)
FINISHED WALL
FINISHED
FLOOR
SUPPLY
AS
REQ'D
14"
(356mm)
C/L OF OUTLET
6"
(152mm)
*10"
(254mm)
16-1/2"
(419mm)
C/L OF SEAT POST HOLES
5-1/2" (140mm CENTERS)
12"
(305mm)
13-7/16"
(341mm)
9-3/8"
(238mm)