Specification Sheet

ManualsBrandsAmerican Standard ManualsToilets2795.204.020

K144

Rev. 2/15

STUDIO

CONCEALED TRAPWAY DUAL FLUSH

RIGHT HEIGHT

ROUND FRONT TOILET WITH SEAT

VITREOUS CHINA

IMPORTANT: Water supply on the wall is required at 2-1/4" or 8" from centerline of the toilet (see rough-in).

First suggested position is hidden behind the toilet. The geometry of the toilet gives space for this installation.

The second suggested position is next to the toilet. Between these two positions, the space for the supply

between wall and toilet is limited to 4-1/2". In this case, check your supply and hose dimensions.

2-1/4"

(57mm)

28-1/4"

(717mm)

8-3/4"

(221mm)

1-1/8"

(29mm)

16-1/2"

(419mm)

4-1/2"

(114mm)

3-1/8"

(81mm)

2-5/8"

(67mm)

7-1/2"

(191mm)

12-7/8"

(328mm)

12-3/16"

(309mm)

16-1/2"

(419mm)

15-3/4"

(399mm)

30-7/8"

(784mm)

12"

(305mm)

FINISHED

FLOOR

FINISHED

WALL

C/L OF SEAT POST

HOLES 5-1/2"

(140mm) CENTERS

SUPPLY

REQUIRED

(position 1

position 2)

(152mm)

5-1/2"

(140mm)

14"

(356mm)

(204mm)

BACK VIEW

(for reference)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.