Installation Guide

11
1. Required tools
Have the following tools for installing this product:
adjustable end wrench, Phillips head screwdriver,
flat-blade screwdriver.
2. Install the junction fitting
1) Close the toilet water shutoff valve fully.
2) Flush the toilet and empty all the water from the
tank.
3) Place a wash bowl or other container
underneath the tank water supply hose. Then
loosen the box nut on the tank inlet side and
remove it.
4) Place the packing in the junction fitting box nut
and connect the tank inlet to the junction fitting.
5) Insert the packing in the tank water supply hose
box nut and connect the tank water supply hose
to the junction fitting.
CAUTION
•Donotovertightenthenut.
CAUTION
•Donotovertightenthenut.
CAUTION
• Be careful not to damage the water supply hose.
Tank Water
Supply Hose
Water Shutoff Valve
Close
Bowl Cock Side
Box Nut
Water Shutoff
Valve
Tank Water
Supply Hose
Packing
Junction
Fitting
Tank Inlet
Box Nut
Packing
Installation
Figure
Installation