Manualshelf

Installation Guide

ManualsBrandsAmerican Standard ManualsKitchen SinksPekoe 22-in x 30-in Stainless Steel Single-Basin Standard Drop-in Apron Front/Farmhouse Residential Kitchen Sink All-in-one Kit with Drainboard
12345678
791679-100 Rev. C 1/18
SUPPORT FRAME
FRAME RUNNING
SIDE TO SIDE
FRAME RUNNING FRONT
TO REAR BOTH SIDES
COUNTERTOP
FRONT VIEW
FRONT VIEW
SINK
SINK
TOP OF CABINET
SINK TO BE LEVEL AND FLUSH
WITH THE TOP SURFACE OF
THE COUNTERTOP
TOP OF SINK RIM MUST
BE FLUSH AND LEVEL
WITH TOP OF CABINET
2
FLUSH MOUNT
INSTALLATION
UNDER MOUNT INSTALLATION SHOWN
FLUSH MOUNT INSTALLATION
2A
2B
UNDER MOUNT
INSTALLATION
- 4 -
Construct a support frame to fit inside the cabinet opening. Ensure you provide proper clearance for faucet,
water supply lines, drain assembly, garbage disposal mounting system and the structural parts of the cabinet.
Flush Mount Installation Note:
Ensure to install the support frame so that the top rim of the sink, (when placed within the frame), will be level
and flush with the top surface of the countertop, (when countertop is installed). See diagram 2A below.
Under Mount Installation Note:
Ensure to install the support frame so that the top rim of the sink (when placed within the frame) is level and
flush with top surface of the cabinet. (Top of sink rim must be flush and level with top of cabinet in order to obtain
proper contact with the underside of the countertop). See diagram 2B below.