Installation Guide
M11
© 2019 AS America Inc.
spec_0954-0955-0958 Murro Wall Hung w/EC Rev 8/18
MURRO
™
UNIVERSAL DESIGN
WALL-HUNG LAVATORY WITH EVERCLEAN
®
VITREOUS CHINA/ACRYLIC
BARRIER FREE
MURRO
™
UNIVERSAL DESIGN
WALL-HUNG LAVATORY WITH EVERCLEAN
®
• Vitreous china with EverClean
• Available with rear overow or less overow
• Recessed self-draining deck
• For concealed arm or wall support
• Optional vitreous china shroud/knee contact guard
0059.020EC available
• Optional acrylic shroud for American Standard
Selectronic Faucet 0062.000EC
• ADA and TAS compliant
❏ 0954.004EC Faucet holes on 102mm (4") Ctrs
with overow (Illustrated)
❏ 0954.123EC Faucet holes on 102mm (4") Ctrs
with overow
• Extra right-hand hole
❏ 0954.121EC Faucet holes on 102mm (4") Ctrs
with overow
• Extra left-hand hole
❏ 0954.904EC Faucet holes on 102mm (4") Ctrs
less overow
❏ 0958.008EC Faucet holes on 203mm (8") Ctrs
with overow
❏ 0958.908EC Faucet holes on 203mm (8") Ctrs
less overow
❏ 0955.001EC Center hole only with overow
❏ 0955.123EC Center hole only with overow
• Extra right-hand hole
❏ 0955.121EC Center hole only with overow
• Extra left-hand hole
❏ 0955.901EC Center hole only less overow
Nominal Dimensions:
520mm (20.5") deep, 540mm (21-1/4") wide
Bowl sizes:
394mm (15-1/2") wide, 343mm (13-1/2")
front to back, 127mm (5") deep
❏ 0062.000EC Acrylic Shroud
❏ 0059.020EC Shroud/Knee Contact Guard
(Vitreous China with EverClean)
(Must be specied separately)
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specied:
❏ Color: ❏ White
❏ Optional Acrylic Shroud: 0062.000EC
❏ Optional Vitreous China Shroud/Knee
Contact guard: 0059.020
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
❏ Nipple:
* See faucet section for additional models available
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDE-
LINES AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Top of front rim mounted 864mm (34") from finished floor.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
Shown with 0059.020EC shroud
Shown with 0062.000EC shroud