User`s guide

MegaRUM II PCI Motherboard User’s Guide
46
Section 2 Advanced CMOS Setup
Choose Advanced CMOS Setup from the AMIBIOS Setup
main menu. Advanced CMOS Setup options are displayed
by highlighting the option using the arrow keys. All
Advanced CMOS Setup options are described in this
section.
Primary Display This option configures the type of monitor attached to the
computer. The settings are Absent, VGA/EGA,
CGA40x25, CGA80x25, or Mono. The Optimal and Fail-
Safe default settings are VGA/EGA.
PS/2Mouse Support Set this option to Enabled to enable AMIBIOS support
for a PS/2-type mouse. The settings are Enabled or
Disabled. The Optimal and Fail-Safe default settings are
Enabled.
Display BIOS P.O.S.T. Messages Set this option to display BIOS
messages during the Power On Self Test. The settings are
Yes or No. The Optimal and Fail-Safe default settings are
Yes.
Pause-On Configuration Screen Set this option to pause at the
configuration screen during setup. The settings are
Disabled, 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, 6 sec, 7 sec, 8
sec, 9 sec, or 10 sec. The Optimal and Fail-Safe default
settings are 10 sec.
BootUp Num Lock Set this option to On to turn the Num Lock key On at
system boot. The settings are On or Off. The Optimal and
Fail-Safe default settings are On.
Password CheckThis option enables the password check option every time
the system boots or the end user runs Setup. If Always is
chosen, a user password prompt appears every time the
computer is turned on. If Setup is chosen, the password
prompt appears if AMIBIOS is executed. See page 66 for
instructions on changing a password. The Optimal and
Power-On defaults are Setup.