User`s guide
MegaRUM II PCI Motherboard User’s Guide
24
Step 9 Connect I/O, Continued
J5 Parallel Port J5 is a 25-pin connector for a parallel port. The J5 pinout
is shown below. Connect the 16-pin to DB25 cable
provided with the motherboard to J5. The parallel port
interface supports:
• the standard Centronics-compatible parallel port,
• the ECP (Extended Capabilities Port), and
• the EPP (Enhanced Parallel Port) port.
All parallel port settings must be correctly configured
through Peripheral Setup in AMIBIOS Setup.
Pin Signal Description Pin Signal Description
1 STROBE# 2 PD0
3 PD1 4 PD2
5 PD3 6 PD4
7 PD5 8 PD6
9 PD7 10 ACK#
11 BUSY 12 PE
13 SLCT 14 AUTOFD#
15 ERROR# 16 INIT#
17 SLCTIN# 18 Ground
19 Ground 20 Ground
21 Ground 22 Ground
23 Ground 24 Ground
25 Ground 26 Ground
Cont’d