User`s guide

Hardware

473

-> dump –destination tftp://192.168.1.1/sg.bin partition1

・ exit

The format of exit command is shown below.

exit

・ help

The format of help command is shown below.

help [<help topics>]

Below are the examples.

-> help

COMMAND COMPLETED :

help

Command Name: Help

SMASH CLP is a command line interface for the remote user to the server. The

commands are of the form of <verb><options><targets><target-properties>.

Commands List:

Dump

Exit

Help

Load

Reset

Set

Show

HINT:

•Before executing this command, the TFTP server should be

configured. Because “UDP/69 is used for the TFTP

protocol,the security setting might be required depending on

the user’s environment.

By pressing CTRL + C, it is possible to interrupt the command

during TFTP network communication.

•SG,System Genaration, means the configuration settings for

the system.