User`s guide

Hardware
165
<Rear>
Maintenance USB Port
Connect Power Code
Maintenance LAN Port
(
Maintenance Service Personnel）
Hub
(Multi-Port Repeater)
Device having USB Interface
(Keyboard, Mouse, FDD, etc.)
Serial Port
Display Device
Hub
(Multi-Port Repeater)
Network System
on LAN
Network System on
Management LAN
NOTE:
Check the cable to be connected.
IMPORTANT:
●
Connect after turning OFF the power of the server and peripherals to be
connected. Connecting them while the power is turned ON causes a
malfunction or failure (except for USB devices).
● When connecting peripherals and interface cables from a company other
than NEC (third party), ask the distributer from which you purchased to
confirm that these devices can be used in the server preliminarily. Some of
devices from third parties cannot be used in the server.
● Form the cable to keep away from the door of the rack or guide rail on the
side.
● Form the power code loosely so that the power code is not pulled off when
the server is pulled out.
● Prevent the plug part of the power code from being pressed.
● For A1080a-D model, a display device, keyboard, and mouse are connected
to the mana
g
ement module of each server.