User manual

Chapter 1 Hardware Installation
21
Step 4 Install Memory
System Memory The motherboard has four 72-pin SIMM – Single Inline Memory Module)
sockets and two 168-pin DIMM sockets. Memory must be populated one bank
at a time. Each bank has two sockets. Each bank must be populated with the
same type of SIMM. If a 16 MB SIMM is installed in the first socket in
Bank0, then the same type of 16 MB SIMM must be installed in the second
Bank0 SIMM socket.
The motherboard supports up to 256 MB of system memory mounted on the
motherboard as follows:
Type of System Memory
Socket
Type of System
Memory
Supported System Memory
four 72-pin SIMM sockets Fast Page Mode or
EDO DRAM
8 MB, 16 MB, 32 MB, 64 MB, or 128
MB
two 168-pin DIMM
sockets
EDO DRAM or
SDRAM
8 MB, 16 MB, 32 MB, 64 MB, or 128
MB
Supported System Memory Configurations
SIMM
Bank0
SIMM
Bank1
DIMM1 DIMM2 Total System
Memory
4 MB and
4 MB
8 MB
8 MB 8 MB
8 MB and
8 MB
16 MB
16 MB 16 MB
16 MB and
16 MB
32 MB
32 MB 32 MB
32 MB and
32 MB
64 MB
64 MB 64 MB
64 MB and
64 MB
128 MB
64 MB 64 MB 128 MB
64 MB and
64 MB
64 MB and
64 MB
256 MB
Cont’d