User Manual

ManualsBrandsAmerican Lighting ManualsLighting & Ceiling FansAmerican Lighting OMNI-3KIT-BK 12V Plug-In Power Supply 78" Lead and Mounting Hardware Dimmable LED Omni 3-Puck Light Kit, Black

OMNI

Specifications

Series

Input voltage

Color temperature

CRI

Wattage

Lumens

Maximum run

Beam angle

Dimming

Housing

Lens

Rating

Dimensions

Switching

Mounting

Lead wire

LED type

Rated life

OMNI

12V DC

2700K

90+

3.2W per puck

140Lm / 145Lm / 150Lm

Dependent upon capacity of driver

120°

PWM, PS-12-12VPI-T* and ELV**

†

Zinc alloy face, steel collar

Polycarbonate

Not rated; Dry locations only

2-5/8”Dia. x 11/16” or 3/32”H

Rocker switch (kits) or wall control

Surface or recess, screws included

24AWG, 78” in length

6 x 2835 SMD LEDs

30,000 hrs

Durable low voltage steel puck lights in three nishes

emit 2700K Warm White LED light with an 85 CRI.

Determine Layout:

Determine quantities of xtures

needed and installation type:

1. Hardwire

2. Plug-in

Select Power Input Accessories:

1. Hardwire: Use LED-DR30-12,

ELV driver or modify PS-12-12VPI

2. Plug-in: Use PS-12-12VPI-T for each group of

less than three. Order kits, which have the plug-

in driver included, for groups of three.

Performance

• Warm White LEDs (2700K) use only 3.2 watts, saving 85%

versus conventional 20 watt incandescent puck lights

• Each puck delivers over 140 lumens – over twice as bright as

xenon puck lights

• Dimmable with 15-100% light control (puck quantity and

dimmer type depend upon driver used)

• Kits include a dimming driver (PS-12-12VPI with connection

block instead of terminal block) and three pucks

Construction

• Zinc alloy LED housing with aluminum heat sink

• Stamped steel surface collar with Nickel or powder coat

painted nish for White and Black

• Spring steel clips secure housing into surface collar with a

snap-t, and retain recessed pucks securely in place

• Polycarbonate lens diffuses light

Installation

• Multiple pucks may be powered by a 12V DC power

supply using parallel wiring (hub system)

• 78” lead wires easily route to power supply location

• Surface mount or recess mount (2-1/4” cut-out)

• Kits are designed for plug-in installations, controlled by

rocker switch on power cord; hardwired installations are

controlled by wall switch or dimmer (see driver details for

more information)

Building a System

Select Linking Accessories:

N/A, parallel wiring uses

hub system

OMNI PUCK LIGHTS

AMERICANLIGHTING.COMTASK LIGHTING

*Per the NEC, switched wall outlets cannot be used with wall dimmers