Spec Sheet

Number of Channels
Direction (FT010CB)
Direction (FT080CF)
Input Type
Output Type
Dry contact Output Rating
1 / 8
Bi-directional
Forward
Dry Contact or TTL input
Dry Contact, NO or NC
Max. 32VDC/VAC @ 100mA
Specifications
Contact Closures
Electrical and Mechanical
Contact Closure Input / Output
Optical Input / Output
Power (Standalone)
Power (Rack-mount)
5-pin screw terminal
ST (standard), FC (optional)
2-pin screw terminal block
Bus connector
Connectors
LED
Fiber Type
Description
Part Number
Max.
Distance
(Km)
No.
of
slots
Wavelengths
(nm)
Options
Notes:
Ordering Information
Optical Power
Budget
(dB)
1-ch bidirectional Contact Closure Transceiver
Multi-mode
(62.5/125μm)
FT010CB-SMRT
FT080CF-SST
1-ch bidirectional Contact Closure Transceiver
8-ch One-way Contact Closure Transmitter
Single-mode
(9/125μm)
1310 17
FT010CB-SSRT
20 2
8-ch One-way Contact Closure TransmitterFT080CF-SMT
 Transmission distance will suffer if additional losses are introduced by the optical connectors, fusions, splices and the fibers within the
network.
 Operating distance of multimode is limited by the characteristics of the fiber bandwidth.
 Power adaptor is manufactured by third party and is supplied with fitted screw - terminal output cables.
 Please feel free to consult factory for any special requirement and customization.
Power Adaptor
Rack Mount Chassis
1-ch bidirectional Conta
ct Closure TransceiverFT010CB-SMTR
1310 | 1550 23 1 1
8-ch One-way Contact Closure Receiver
1310 23
FT080CF-SMR
1 2
1-ch bidirectional Contact Closure Transceiver
1310 | 1550 17
FT010CB-SSTR
20 1
FT080CF-SSR 8-ch One-way Contact Closure Receiver
FT010CB / FT080CF
IS O 90 01 :2000
FM 8 86 38
FT010CB
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 2.4W
From FT-C18 Chassis
156 x 30.5 x 223mm(Max)
148 x 20.4 x 213mm(Max)
0.58kg
0.2kg
FT080CF
Power (Standalone)
Power (Rack Mount)
Dimensions(WxHxD) (Standalone)
Dimensions(WxHxD) (Rack Mount)
Shipping Weight (Standalone)
Shipping Weight (Rack Mount)
12VDC @ 4.2W
From FT-C18 Chassis
156 x 50.5 x 223mm(Max)
148 x 41.4 x 213mm(Max)
0.78kg
0.28kg
 ST type connector is standard. For FC type, specify “F” in the suffix. E.g. FMTR/FMT
 For Standalone type, please add “SA”. E.g. SMTRSA/SMTSA
 Please feel free to consult factory if longer transmission distance is required.
 Power adaptor is included in Standalone type only.
 FT-C18 is to be purchased separately. Please refer to accessories section for the details.
Contact Closure Input / Output
Optical Carrier Detected
Power
Red/Green LED lit
Yellow / Active
Red/On
Environmental
Operating Temp
Storage Temp
Relative Humidity
MTBF
-40°C to +75°C
-40°C to +85°C
0 to 95% non-condensing
> 100,000 hours
Video Transmission
www.ot-systems.com
2