User Manual

46
Gamma: This threshold value changes image brightness via nonlinear method and improves dynamic
display range. The higher this value, the brighter image will be and vice versa. The value ranges from 0
to 100. The recommended value ranges from 40 to 60. The default value is 50.
Mirror: This is to flip the video horizontally (as if looking in a mirror). This function is disabled by default.
Flip: This is to flip the video upside down. This function is disabled by default.
3D NR: This reduces the noise in the video which helps to enhance the quality of the image.
BLC Mode: This is to compensate for the backlight and includes several options: High/Low/Stop.
Off: This is to disable backlight compensation. Please note this function is disabled by default.
BLC: Allows the system to automatically adjust exposure according to the environments situation so
that the darkest area of the video is cleared.
HLC: This option allows the device to lower the brightness of the brightest section according to the
HLC control level. It can reduce the area of the halo and lower the brightness of the whole video.
WDR: This option helps balance washed out video that has a large dynamic range.
Scene Self-Adaption: Allows the system to auto compensate the color temperature to make sure
the image color is optimal.
White Balance: This dropdown menu allows the user to set white balance modes. White balance (WB) is
the process of removing unrealistic color casts, so that objects which appear white in person are
rendered white in the image.
Auto: The auto white balance is on. System can auto compensate the color temperature to make
sure the vide color is proper.
Outdoor: Allows the device to compensate in outdoor environments.
Natural: Allows the device to balance natural light to prevent a washed-out image.
Street Lamp: Allows device to compensate white balance during night time/street lamp conditions.
Manual: Allows the white balance of the device to be manually adjusted by the user.
Customized Zone: You can set the gain of the red/blue channel. The value reneges from 0 to 100.
Day & Night Mode: This is to set the device to output color or B/W video. The default setup is auto.
Auto: The device auto selects to output color or B/W video according to the device feature (The
general brightness of the video or if there is IR lights or not.)
Color: The device outputs color video.
Black/White: The device outputs the black and white video.
To revert to default settings, click the Default button near the bottom left hand corner. Press the
Refresh button to refresh the interface. To confirm settings, click the Save button.
Encode
This tab is used to set the audio/video encoding settings for each channel. The interface will display each
stream (Main Stream and Sub Stream) depending on the capabilities of the connected device.
Encode Mode
See below for a screenshot of the tab: