Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronicsNV4108-HS 4K NVR (8CH 1080p/3MP/4MP/5MP/6MP/8MP) Network Video Recorder -Supports up to 8 x 8-Megapixel IP Cameras @30fps Realtime, Pre-Installed 2TB Hard Drive (No Built-In WiFi) (NV4108-2TB)
41424344454647484950
44
Upgrade
This tab allows the user to upgrade the firmware for their camera directly from the NVR.
Below is a screenshot of this menu:
Below is an explanation of the fields listed in this menu:
Channel: Indicates the channel number of the camera being monitored.
Status: Indicates the connection status of the camera. It can be either green, for good connection, or
red, for possible connection issue.
IP Address: Indicates the IP address of the connected camera.
Version: Indicates what firmware version the camera is running on.
Update Status: Allows the user to see if the firmware needs to be updated. If the firmware for the
camera needs to be updated the system will say, “To be upgraded”.
Port: Displays the TCP port number for the camera.
Type: Indicates the model of the camera being connected to the NVR.
Manufacturer: Indicates the current protocol being used by the camera.
Image
The Image tab allows the user to adjust image settings such as, saturation, brightness, contrast, sharpness,
gamma, as well as flip and mirror the image. Below is a screenshot of this menu: