Manualshelf

User Manual

ManualsBrandsAmcrest ManualsElectronics4K UltraHD 8 Channel DVR Security Camera System Recorder, 8MP Security DVR for Analog Security Cameras & Amcrest IP Cameras, Remote Smartphone Access, HDD & Cameras NOT Included (AMDV8M8-H5)
11121314151617181920
17
3.4.1. Using an Amcrest 4-in-1 Camera
Quadbrid or 4-in-1 technology, allows for a flexible means of providing HD-CVI, HD-TVI, AHD, and Analog formatted
video to your DVR. The signal is transmitted uncompressed, which eliminates latency and allows for real-time,
highly reliable video security without loss or delay. The cameras connect point-to-point directly to the DVR (BNC)
which provides a highly secure, closed network, as well as a painless and non-complex plug-and-play setup
process. The toggle switch for your 4-in-1 camera is represented in the image below:
Most Amcrest DVRs will require you to set the camera to HD-CVI or Analog (960H) settings and may not be
compatible with HD-TVI or AHD. Ensure your 4-in-1 camera's toggle switch is set to the proper setting as indicated
in the diagram below.
Note: If the proper mode configuration is not set, you will not be able to view your camera on your DVR. Please
make sure you have the proper settings on your camera before you begin setting up or installing.
To install your Amcrest 4-in-1 camera, please follow the steps provided below:
Note: Make sure you have the proper mode configuration on your camera before running or connecting any
cables. Refer to the Figure 1-1 for more details on how to set mode configurations for your specific DVR.