IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
INTRODUCTION With the PRO MIXER, you have purchased an absolutely state-of-the-art DJ mixer. Its extensive features open the door to new and creative ways of working, while making it suitable for a variety of professional applications. At the same time, the unit is extremely easy to operate, allowing you to completely creative and professional. Time waits for no one, and neither you nor we want to be left behind.
1. FRONT PANEL 1. The MIC Bal. control two MIC level balance or close one MIC input. 2. The MIC LEVEL control adjusts the volume of the microphone signal. 3. The CHANNEL 1 fader adjusts the final channel volume. 4. The PHONO/LINE switch selects one of the input pairs on the respective channel. The “PHONO” setting (and inputs) is intended for turntables; for all other signal sources, i.e. a CD or MD player, use the “LINE” setting and inputs. 5. The CHANNEL 2 fader adjusts the final channel volume. 6.
13. Next. 14. Previous 15. Play and Pause. 16. To choose play USB or bluetooth source 17. The LEVEL control determines the volume of the headphones signal. 18. The CROSSFADER is used to fade between channels1 and 2. 19. MIC TALKOVER Allows you to lower the level of the input sources so you can talk them using the DJ MIC 2. REAR PANEL With the exception of HEADPONES, all of the unit’s audio connections are located on the rear panel and supplied as RCA connectors. 20.
27. The HEADPHONES jack allows you to connect your headphones for pre-listening (PFL signal). For best results, use headphones with an impedance rating of at least 32 Ohms BUTTON CONTROLS AND FUNCTIONS 1. MODE BUTTON This button lets you toggle a working mode, USB play mode, Bluetooth mode. This lets you choose which music source device will play. The LEDS will verify which mode is activated. MODE USB play mode Bluetooth mode Sets search Connecting LED1 LED2 ON OFF FLASH ON OFF ON 2.
The volume of Bluetooth will turn down if press and holding the button for more than 3 seconds. 4. NEXT BUTTON---- This button has six functions depending on these different modes as below. (a) USB Play Mode---NEXT and FF Use this button to select next track. The unit will fast forward play if press and holding the button for more than 3 seconds. (b) Bluetooth Mode----PREV and Volume down Use this button to select previous track.
www.PyleAudio.
§ 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
