Tus neeg siv phau ntawv

9ENGLISH
The device is designed for inflating tyres (bicycles/cars) and inflatable play equipment, sports and
beach items; but not for high-volume inflatable items such as rubber dinghies and large air mattress-
es.
The pressure display is calibrated
It is also suitable for measuring current pressure.
This appliance is not designed for continuous operation. The device can be used for a maximum of
6 minutes of continuous operation. If the device overheats, remove the battery. Allow the device to
cool down completely and then try using it again.
Indication displays
• Press switch 5 on display 3 or press switch 2 to turn on the display indicator.
• The last set pressure is displayed for 2 seconds.
• The current pressure of the connected item is displayed after 2 seconds.
NOTE: If the compressed air hose is not connected to a suitable object, the value "0" will appear on
the display. When the display is on, you can switch between "bar" and "psi" by pressing the ON / OFF
button (5).
To switch off the display indicator, press the ON / OFF button (5) for 3 seconds.
NOTE: If the indicator on the display is off, the compressor will not work.
Pressure setting
• Hold down the "+" or "-" button until the display flashes.
• Press the "+" or "-" button to set the desired pressure.
Once you see the desired pressure on the display, do not press any button for about 3 seconds. The
required pressure is now set.
NOTE: The indicator on the display (and therefore also the compressor) switches off after approxi-
mately three minutes of inactivity.
RECOMMENDATION: If you press and hold the "+" or "-" button, the pressure will change rapidly.
Initial operation
• Loosen the union nut (do not unscrew it completely!), screw in the threaded connection of com-
pressed air hose 13 and retighten the union nut.
• Set the required pressure.
• Fit one of the supplied adapters (7/8/9/10/11/12) on the compressed air hose adapter 15. Press
down on the lock on section 15.
OPERATION