Assembly Instructions

ASSEMBLY INSTRUCTIONS

Before assembling your Bed slat kit, please read through these

instructions carefully. Familiarize yourself with the different parts.

PARTS LIST

Step 1

Step 2

SLAT KIT

CENTER RAIL

TALL CENTER LEG

SHORT CENTER LEG

2 SET

2 PCS

4 PCS

Please note that you will require a Phillips Head Screwdriver and an Allen wrench.

Allen wrench

Assemble center leg (03 / 04) and center rail (02)

Unpack slat kit and check that contents are complete

Assemble bed frame according to bed assembly instructions.

If using mattress and foundation set the bed up low and use short center leg.

If using bed drawer choose the tall center leg.

using allen screw (A).

Tighten with the allen wrench (C).

Repeat for other center rail.

03 / 04

HARDWARE

1 1/2” Allen Screw - 8 pcs

Spare - 1 pc

1 1/4” Wood Screw - 8 pcs

Spare - 2 pcs

Allen wrench - 1 pc

Spare - 1 pc

READY

SLAT KIT PLATFORM BED

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, ALLEN

SCREW OR WOOD SCREW ARE DAMAGED DURING ASSEMBLY.

Adult Assembly

1 1/2” Allen Screw

Slat Kit Full Platform Bed Page 1 of 2

PAGE 1
READY SLAT KIT PLATFORM BED ASSEMBLY INSTRUCTIONS Before assembling your Bed slat kit, please read through these instructions carefully. Familiarize yourself with the different parts. Please note that you will require a Phillips Head Screwdriver and an Allen wrench.
PAGE 2
Step 3 A A 01 A Adult Assembly 02 SECTION 1 A SECTION 2 1 1/2” Allen Screw TRUNDLE BED C A Allen wrench Lay the slat kit (01) onto the bed. Attach center rail assembly (02) to slat kit (01). Using allen screw (A), tighten with the allen wrench (C). Repeat for section 2. A SECTION 1 If using a trundle bed attach center rail assembly off center as shown. Repeat for section 2.