Assembly Instructions

ASSEMBLY INSTRUCTIONS

TWIN FULL > QUEEN KING

BED WITH BED DRAWER

FLAT PANEL BED DRAWER

Page 1 of 3

FLAT PANEL BED DRAWER

JCB M6 X 1” ( 25mm ) - 16 pcs

Spare - 2 pcs

Allen Wrench - 1 pc

Spare - 1 pc

Adult Assembly

Allen Wrench

READY

Before assembling your Flat panel bed drawer, please read through these

Thank you for choosing our new Bed drawer.

This practical design offers the utmost in versatility.

instructions carefully. Familiarize yourself with the different parts.

NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH OR JCB ARE DAMAGED DURING ASSEMBLY.

HARDWARE

PAGE 1
READY FLAT PANEL BED DRAWER TWIN FULL > QUEEN KING ASSEMBLY INSTRUCTIONS Thank you for choosing our new Bed drawer. This practical design offers the utmost in versatility. Before assembling your Flat panel bed drawer, please read through these instructions carefully. Familiarize yourself with the different parts. Adult Assembly Allen Wrench BED WITH BED DRAWER HARDWARE NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH OR JCB ARE DAMAGED DURING ASSEMBLY.
PAGE 2
PARTS LIST 03 05 06 01 02 04 01 HARDWARE 1 BOX 04 RIGHT DRAWER SIDE 2 PCS 02 DRAWER FACE 2 PCS 05 DRAWER BACK 2 PCS 03 LEFT DRAWER SIDE 2 PCS 06 DRAWER PANEL 2 PCS Lay the drawer face (02) on smoth, flat surface so the groove are facing upwards. Fit the drawer side (03)(04) to drawer face (02), Use JCB M6 X 1” (A) to attach the drawer side in place, but don't fully tighten these yet. Leave them a bit loose to make fitting the drawer back easier.
PAGE 3
STEP 2 Guide the drawer panel (06) in carefully so that it won’t jump out of its grooves. Be sure it fits fully into its groove at the bottom (in the drawer face) before fitting the drawer back. 06 Adult Assembly STEP 3 Attach drawer back (05) to the bed drawer assemblies as shown bellow. Using JCB (A ) Tighten with allen wrench (B). After this tighten all JCB to the drawer face. Repeat step 1 through 3 for second storage drawer.