User Manual

Chapter 4 - Operation and Administration BTS Menu
BreezeMAX Extreme 91 System Manual
4.5.5.2 Show Active Alarm Log Table
Select to view the currently active alarms. For each active alarm, the following
details are displayed:
 Seq#: The sequential identification number of the event (trap).
 Time: The Date and Time at which the alarm was generated.
 MO Type & Instance: The Type and Instance (ID number) of the applicable
Managed Object. The possible MO Types are BTS, ASN GW, AAA, Sector, BS,
Radio Channel, GPS, Antenna, MS, and MS Service.
 Event Type: The type of event (first level of event description).
 Probable Cause: The probable cause of the event (second level of event
description).
 Specific Problem: The specific problem that caused the event (third level of
event description).
 Alarm Severity: The defined severity of the Alarm.
 Object Severity: The combined events severity for the Managed Object at the
time the alarm was generated.
For more details on alarms, refer to the Traps and Alarms document.
4.5.5.3 Event Log Selection Criteria
This submenu enables Select to view/update the filtering criteria for the Show
Event Log Table By Selection Criteria display (see “Show Event Log Table By
Selection Criteria” on page 92). For more details on events refer to the Traps and
Alarms document. The configurable filtering criteria are:
 Minimum Severity
 Last Days
 Managed Object Type
 Specific Event Category