User's Manual

Device Setup and Management
BreezeNET PRO.11 Series 3-3 User’s Guide
1.5 Station
Control
1.5.1 Reset Unit
1.5.2 Load Factory Defaults
1.6.Security
(Not activated)
1.6.1 Authentication Algorithm
1.6.2 Default Key ID
1.6.3 Preauthentication
A. WEP Default Key #1
B WEP Default Key #2
C. WEP Default Key #3
D. WEP Default Key #4
Open System Key
#1
Disabled
User defined User
defined User
defined User
defined
2. Advanced
Settings
2.1 Translation
Mode
Enabled
2.2 Roaming 2.2.1 Max Number of Scanning
2.2.2 Roaming Decision Window
2.2.3 Roaming Decision Numerator
2.2.4 Roaming Decision RSSI Threshold
2.2.5 Jogging Decision RSSI Threshold
2.2.6 Number of Beacons for Disconnect
Decision
2.2.7 Number of Probe Responses
Neighboring Beacon Rate
70
10
6
60
65
4
Sent every 40
dwell times
2.3 Performance 2.3.1 Dwell Time (AP Only)
2.3.2 RTS Threshold
2.3.3 Max Number of Re-Transmissions
2.3.4 Number of Dwells to Re-Transmit
2.3.5 Max Multicast Rate
2.3.6 Power Saving (Not activated)
2.3.7 DTIM Period (Not activated)
2.3.8 IP Stack
2.3.9 Acknowledge Delay
128 millisecs
120 bytes
1
2
1 Mbps
Disabled
4
Enabled
Regular
2.4 Radio 2.4.1 Hopping Standard
2.4.2 Display Site Proprietary Sequences
2.4.3 Power Level
2.4.4 Carrier Semse Level
2.4.5 Carrier Sense Difference Level
US FCC
User defined
High
50
14
2.5 Rate 2.5.1 Multi – Rate Support
2.5.2 Multi – Rate Decision window Size
Enabled
3
2.6 AP
Redundancy
Support
Enter New AP Redundancy Support
Decision Period (in seconds)
Disabled
2.7 Maintenance 2.7.1 Auto Calibration
2.7.2 Wait for association Address
2.7.3 Japan Call sign
Enabled
Wait for update
3. Site Survey 3.1 System
Counters
3.1.1 Display Ethernet and WLAN
Counters
3.1.2 Display Rate Counters
3.1.3 Display Rx Packets per Frequency
3.1.4 Reset All Counters
3.1.5 Power Saving Counters
3.2 Survey
Software
3.2.1 Operation Mode (Rx/Tx)
3.2.2 Start Statistics
3.2.3 Stop Statistics
Rx