User's Manual

Amplifier Kit
BreezeNET PRO.11 Series 0-3 User’s Guide
Amplifier Connections and Indicators
Transmit
LED:
This LED glows RED in transmit mode.
Receive
LED:
This LED glows GREEN in the “receive” mode. (When DC power is supplied, the unit defaults to receive
mode).
DC Injector
Connection:
This “N” Female connector is connected to the DC Power Injector via the transmission cable.
Antenna
Connection:
This “N” Female connector connects to the antenna with a short length of coax cable.
DC Power Injector Connections and Indicators
A DC Power Injector is an in-line device which “injects” the DC power necessary to
operate the amplifier onto a transmission line. This allows the cable to carry both
RF signals and DC power to the mast-mounted amplifier.
Transmit
LED:
This LED glows RED when the pole mounted amplifier goes into the transmit mode.
The Remote Transmit LED is driven by unique circuitry, which actually detects changes
in the DC current traveling through the transmission line to the amplifier.
Receive
LED:
This LED glows GREEN when DC power is applied to the amplifier and it is in the
receive mode. When toggling between transmit and receive this LED will glow slightly
dimmer.
To Radio
Connection:
This “N” Female connector is connected to the radio modem via a short jumper cable.
To
Amplifier
Connection:
This “N” Female connector connects to the amplifier on the mast via the transmission
line.
12 VDC:
This is the DC power input for the injector and is a standard 2.1mm barrel jack.
+12VDC should be applied with center positive.