User Manual

Chapter 4 - Operation and Administration Using the CLI NPU Configuration
4Motion 177 System Manual
4.3.4.3.3 Making Automatic Backups of the Current Configuration
You can enable the system to automatically make daily backups of the current
configuration at a specific time. (You can also manually make a backup of the
configuration. For details, refer to Section 4.3.4.3.1.)
To enable the system to make automatic backups of the current configuration,
run the following command:
npu(config)# auto-backup-time <hh:mm>
Specify the time in the 24-hour format. The system will automatically make a
backup of the current configuration, everyday, at the time that you have specified.
Display
Format
The Status of the File Backup operation is: <status-value>
Where <status value> may be any of the following:
 Generating (1)
 Copying (2)
 Compressing (3)
 Compression Failure (4)
 Copying Failed (5)
 Completed (6)
Command
Modes
Global command mode
NOTE
By default, the system makes a daily backup of the current configuration, at 00:00 hours.
IMPORTANT
You can restore the configuration from any of the backup configuration files residing in the NPU
flash. For details refer to
Section 4.3.4.3.4.
Command
Syntax
npu(config)# auto-backup-time <hh:mm>