User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs

4Motion 617 System Manual

3.8.23 Managing Ranging Parameters

1 Enable the Ranging configuration mode (refer to Section 3.8.23.1)

2 You can now execute any of the following tasks:

» Configure the Ranging General parameters (refer to Section 3.8.23.2)

» Restore the default values of one or more of the Ranging General

parameters (refer to Section 3.8.23.3)

» Terminate the Ranging configuration mode (refer to Section 3.8.23.4)

In addition, you can, at any time, display configuration information for the

Ranging General parameters (refer to Section 3.8.23.5).

3.8.23.1 Enabling the Ranging Configuration Mode

To configure the Ranging parameters, first enable the Ranging configuration

mode. Run the following command to enable the Ranging configuration mode.

npu(config-bs-66053)# ranging

The Ranging configuration mode is enabled, after which you can execute any of

the following tasks:

 Configure one or more of the Ranging General parameters (refer to

Section 3.8.23.2)

 Restore the default values of one or more of the Ranging General parameters

(refer to Section 3.8.23.3)

After executing the above tasks, you can terminate the Ranging configuration

mode (refer to Section 3.8.23.4) and return to the BS configuration mode.

To configure the Ranging parameters:

Command

Syntax

npu(config-bs-66053)# ranging

Privilege

Level