User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 530 System Manual
3.8.13.2.2 Configuring the Neighbor BS Required C/N Level Parameters
The Neighbor BS Required C/N Levels table enables defining the Carrier to Noise
Ratios required for various types of transmissions.
[preamble-idx <(0
to 113 StepSize 1)>
]
Neighbour BS
Preamble Index.
When translated to an
8 bits binary string, bits
0-6 of this parameter
are used to indicate the
neighbour BS
preamble index. Bit 7 is
used to indicate the
neighbour BS reuse
type for CINR
measurement for
handover purposes
Bits 0-6 should be the
same as preamble-idx
in displayed
information of Airframe
General parameters of
the relevant BS (see
Section 3.8.16.5.1
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 255
[paging-grp-id <(0
to 65535 StepSize
1)> ]
The neighbour BS
Paging Group Id
Should be taken from
Idle Mode
paging-group-id
parameter of the
relevant BS (see
Section 3.8.28)
Optional 0 0 - 65535
[nbr-strt-rng-codes
<(0 to 255 StepSize
1)> ]
The neighbor BS
starting number; S; of
the group of codes
used for this uplink.
Should be taken from
Ranging General,
start-of-rng-codes
parameters of the
relevant BS (see
Section 3.8.23.2)
Optional 0 0 -255
Command
Modes
bs neighbour bs configuration mode