User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 528 System Manual
[srvcsupport
<hex-string>]
Scheduling Service
Support. Two
hexadeximal digits that
can be presented as 8
bits where tbits 5-7 are
always 0. Bits 0-4
indicate whether
specific services are
supported, where a
value of 1 means that
the service is
supported: UGS (0),
RT-PS(1), NRT-PS(2),
BE(3), ERT-PS(4).
Should be taken from
the displayed
information for
Handover Control
(hoctrl) in the relevant
BS (see
Section 3.8.20.
Optional c8
(11001000,
meaning
that the BS
supports
UGS,
RT-PS and
ERT-PS
scheduling
services).
Two hexadecimal
digits.
[bw {fiveMHz |
tenMHz |
sevenMHz} ]
The bandwidth of
neighbour BS.
Should be taken from
Baseband bandwidth
parameter of the
relevant BS (see
Section 3.8.15.2)
Mandatory
When
creating a
new
Neighbour
BS.
N/A
 fiveMHz
 tenMHz
 sevenMHz
[feedbackzone-per
mbase <(0 to 69
StepSize 1)> ]
The first uplink zone
permutation base of
the neighbor BS.
In current release this
equals the feedback
zone permutation base
(see
Section 3.8.16.5.4)
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 69
[ucd-configchangec
ount <(0 to 255
StepSize 1)>]
UCD configuration
change count of
neighbor BS
In the current release
must be set to 0.
Mandatory
When
creating a
new
Neighbour
BS.
N/A 0 - 255
must be set to 0