User's Manual

Chapter 3 - Operation and Administration Using the CLI Managing BSs
4Motion 490 System Manual
3.8.5.6.5 Displaying Configuration Information for All Service Mapping Profile
Parameters
To display all configuration parameters of a specific or all Service Mapping Rules,
run the following command:
npu# show srvcmaprule-all bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to
255 StepSize 1)>]
Specify the BS ID and Service Mapping Rule index if you want to display
configuration for a particular Service Mapping Rule. For example, to display all
parameters of Service Mapping Rule 1 in BS 66053, run the following command:
npu# show srvcmaprule-all bs 66053 rule-index 1
Do not specify these parameters if you want to view configuration information for
all existing Service Mapping Rules. To display information for all Service Mapping
Rules, run the following command:
npu# show srvcmaprule-all bs
Command
Modes
Global command mode
Command
Syntax
npu# show srvcmaprule-all bs [<(1 to 16777215 StepSize 1)> rule-index <(1 to 255 StepSize 1)>]
Privilege
Level
10
Syntax
Description
Parameter Description Presence Default
Value
Possible
Values
<(1 to 16777215
StepSize 1)>
The BS ID
Specify a value for this
parameter if you want to
display all parameters of a
specific Service Mapping
Rule. Do not specify a value
for this parameter if you want
to display all parameters of all
Service Mapping Rules.
Optional N/A 1-16777215