MULTI-TASKER™ MANUAL PART NUMBER: 400-0397-001 MT107-304 8 OUTPUTS, FIBER OPTIC FOR MULTI-TASKER™ MATRIX SWITCHER USER’S GUIDE
MULTI-TASKER™ TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS ..............2 GENERAL..........................................................2 INSTALLATION .................................................2 CLEANING.........................................................2 FCC / CE NOTICE..............................................2 ABOUT YOUR MT107-304...................................3 TECHNICAL SPECIFICATIONS...........................3 PRODUCT DESCRIPTION ..................................
MULTI-TASKER™ PRECAUTIONS / SAFETY WARNINGS • 1 Please read this manual carefully before using your MT107-304. Keep this manual handy for future reference. These safety instructions are to ensure the long life of your MT107-304 and to prevent fire and shock hazard. Please read them carefully and heed all warnings. 1.1 GENERAL • Qualified ALTINEX service personnel, or their authorized representatives must perform all service. 1.
MULTI-TASKER™ ABOUT YOUR MT107-304 2 TECHNICAL SPECIFICATIONS MT107-304 FEATURES/ DESCRIPTION GENERAL Outputs Output Connectors Compatibility 8 OUTPUTS, FIBER OPTIC OUTPUT CARD The MT107-304 is an 8 Fiber Optic Output expansion card for use with the MT107-104 64X64 Matrix Engine. The MT107-304 outputs are compatible with Altinex DA1934KM Receiver. MT107-304 8 8 ST Fiber Optic Transmitter Signal types Each MT107-304 connects to the Output Connector on the MT107-104 Matrix Engine.
MULTI-TASKER™ PRODUCT DESCRIPTION 4 4
MULTI-TASKER™ APPLICATION DIAGRAM 5 DIAGRAM 1: TYPICAL CONFIGURATION 5
MULTI-TASKER™ DIAGRAM 2 INTERNAL VIEW MT107-304, 8 FIBER OPTIC OUTPUTS IN1 OUT1 IN2 OUT2 IN3 OUT3 IN4 OUT4 FIBER OPTIC OUTPUT 40P IDC IN5 OUT5 IN6 OUT6 IN7 OUT7 IN8 OUT8 POWER PRESENT 6
MULTI-TASKER™ INSTALLING YOUR MT107-304 6 OPERATION Step 1. Locate the Matrix Engine, MT107-104 or MT107-100, currently installed in the Multi-Tasker™. Ensure there are enough empty slots in the enclosure to allow for the one or more MT107-304's to be installed. 7 7.1 RS-232 CONTROL The MT107-304 has many advanced remote control capabilities when used in the Multi-Tasker™ Enclosure as part of an MT107-104 Matrix Switcher. These capabilities are accessible through standard RS-232 communication.
MULTI-TASKER™ Cause 3: The path is not selected. ALTINEX POLICY Solution: Make sure the input to output path is correctly selected. 9.1 LIMITED WARRANTY/RETURN POLICY Please see the Altinex website at www.altinex.com for details on warranty and return policy. For example, Input 17 is connected to Output 1 in the matrix engine. Physically, the source signal should be connected to Input 17 and the receiving cable should be connected to Output 1.
