User guide
Chapter Document Version Changes Made
• Updated the figure for Transceiver
Native PHY IP Core Parameter Editor.
• PMA parameters
• Updated the PMA parameter
categorization in the TX PMA and
RX PMA "Equalization" section.
• Added parameters Enable tx_pma_
iqtxrx_clkout port and Enable
tx_seriallpbken port in "TX PMA
Optional Ports" table.
• Added parameters Enable rx_pma_
iqtxrx_clkout port in "RX PMA
Optional Ports" table.
• Updated "RX PMA Parameters" table
into "RX CDR Options" and
"Equalization" sections.
• Removed the option Enable rx_
pma_div_clkout division factor
from RX PMA optional ports table.
• Updated the description of "CTLE
Adaptation Mode" and "DFE
Adaptation Mode" in "RX PMA"
parameter table.
• Updated value and description for
parameter Enable tx_pma_clkout
port and Enable tx_pma_div_
clkout port in "TX Bonding
Options" table.
• Updated value and description for
parameter Enable rx_pma_clkout
port and Enable rx_pma_div_
clkout port in "RX PMA Optional
Ports" table.
9-6
Document Revision History for Current Release
UG-01143
2015.05.11
Altera Corporation
Document Revision History for Current Release
Send Feedback